tool box

Forum › Forums › Tractor Operation And Maintenance › tool box

Viewing 3 reply threads
  • Author
    Posts
    • May 22, 2012 at 6:27 pm #30574
      dogdoc
      Participant
        • Offline

        Hey,

        Anybody got a good location to mount a tool box.  I am thinking of the right rear fender as you must enter from the left side.  The small box on the inside of the left fender does not cut it.

        Thanks

      • May 26, 2012 at 10:02 pm #34660
        Carl Darnell
        Participant
          • Offline

          I have a 254 and I put the tool box on the left fender.

        • May 28, 2012 at 10:48 am #34661
          DavidPrivett
          Participant
            • Offline

            I made brackets and placed one on each rops pillar ,one just was not big enough to carry all what I wanted to lug around

          • June 1, 2012 at 7:50 pm #34674
            Grumpy
            Participant
              • Offline

              I have a 254 with FEL. The FEL has channel steel running up both sides of the tractor about hood height, and then across the front just in front of the hood. I mounted mine on top of the front left corner of this FEL framing. The framing across the front can be easily removed by pulling 2 hitch pins, so I also stuck a 20' chain in a piece of 3″ PVC pipe and mounted it behind the front framing piece.

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.