- This topic has 6 replies, 5 voices, and was last updated 10 years, 2 months ago by
.
-
Posts
-
-
I think it was a couple years back on the old forums, was pictures of the modification of an external hydralic oil filter just out side the hydralic sump where the screen was plumbed. Does anyone remember the forum name or where I can get the installation proceedures and pictures?
Mountain Joe
-
I believe someone installed a suction mesh filter (looks like a spin-on filter but it's actually a 150 mesh wire gauze element). The installation should be pretty straightforward, and the parts are easy to come by. I think you have to remove the in-tank screen. Sorry I couldn't be more help. It's not a dozer.
Account deleted.
-
Hi Joe,
Just ordered a external hyd. oil filter from http://www.affordabletractorsalesco.com It seem to have what is needed to install the filter to existing piping.
Check it out.
Good luck
Lou
-
Our external Hydraulic filter kits, it's made to install on the return line near the pump, you cut out a 3″ section of the hard line and install the filter head with 2- compression type fittings.You will need to cut the screen off the existing hydraulic filter in the hydraulic tank, but you must keep the pick up pipe
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
Tommy, Im interested in your filter hookup. I just bought a used Jinma with loader. My other one has a home built hookup which clutters things up a bit.
Can you clarify where yours mounts again. I dont think there is a return line near the pump (from your last post). Or maybe Im not remembering rihgt. This is a return filter and not a suction filter, correct?
-
Look at this pic, it's going to be similer to this locationTommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
http://www.affordabletractorsalesco.com
To
-
-
- You must be logged in to reply to this topic.