Forum › Forums › Help Me Find A Part › Looking for radiator for JM354 with Y485T engine.
- This topic has 5 replies, 3 voices, and was last updated 10 years, 2 months ago by postgenerate.
-
AuthorPosts
-
-
August 26, 2014 at 2:31 pm #30927
Howdy, I am struggling to find anyone that has this radiator in stock. Even better, I am looking for a cross reference between this and a super discount generic radiator. What is also odd is the parts guide for this tractor appears to have every part diagrammed out with part numbers except this radiator.
Thanks in advance!
-
August 26, 2014 at 9:31 pm #37166
Can you send me a pic of yours , I think it's the same as the one for the Y385 ???
tommy@affordabletractorsalesco.com
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
August 27, 2014 at 6:53 am #37168
Thank you Tommy, From you website, the radiator for the 385T appears to be different in this way:
1, my radiator has the upper hole just to the right of the fill hole while the 385T appears to be offset to far right.
2. the lower hole of the 385T appears to be coming straight out the bottom while my radiator is located in the same place it takes a 45 degree turn to the upper left
Its hard to take the pic because its on the tractor.
the dimensions are: outside width 18.5 inches. Height to top of fill cap bout 22.5 inches. height to top/bottom of “chambers” not core. is 21.5.
I am starting to think I take it to a radiator shop.
-
August 27, 2014 at 8:14 am #37169
I think that these radiators are fixable as no plastic or aluminum,I know I have resoldered the fill neck on mine, but they are thin.
-
August 27, 2014 at 11:42 am #37170
The New Radiators for the Y385T the bottom outlet is on a 45 degree to the left ? If the hole on top is over too far to the right you can get a different upper hose. I think the radiator is the same, I will have the shop measure one to confirm. If you will call the shop 979-865-4002 they can measure one for you , if they are busy they may need to call you back.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
August 27, 2014 at 12:29 pm #37171
Thanks, I agree. a different top hose could work. the bottom has to be angled away. So that is good. None the less the real problem is just that the rivets that connect the upper bracket have rusted through. Given the cost, I think I am going to try to get this fixed first and come up with another way to secure the top bracket with a cradle bracket over the top. I appreciate the help.
-
-
AuthorPosts
- You must be logged in to reply to this topic.