- This topic has 1 reply, 1 voice, and was last updated 10 years, 2 months ago by
.
-
Posts
-
-
All I can find for manuals on this tractor is a parts manual (in Chinese of course). The top link screwed off of the spring rod. In order to put it back to where it should belong I need to remove the roll pin (parallel pin) but cannot figure out how to get the nut out to do it.
Any advice??
Thanks,
Tom
-
Never mind, figured it out. The parts manual indicated that the part that the roll pin goes through is threaded. Put a bar through the link and turned it and out it came. Popped the pin out. Had to try several times to get the yoke (?) threaded in far enough to put the pin back and then turn the whole assembly back in place. Readjust the linkage inside the hydraulic box and lo and behold it seems to work. Not sure why it came out in the first place with the exception that the previous owner had it out and never new how to put it back correctly. Now if I can only find my COOLEY hat that my daughter says I have to wear when using the tractor????!!!?”?”
-
- You must be logged in to reply to this topic.