Jinma 354 with a ZL-30 front end loader and backhoe

Forum › Forums › Tractor Operation And Maintenance › Jinma 354 with a ZL-30 front end loader and backhoe

Viewing 4 reply threads
  • Author
    Posts
    • April 6, 2018 at 4:54 pm #47770
      Roger
      Participant
        • Offline

        Hello everyone, I have a Jinma 354 with front end loader and backhoe. The front end loader will not lift or rotate the bucket. The backhoe operates as it should. The front end loader worked in the fall when I parked it but now does nothing. I am sure this has been answered somewhere but any help would be appreciated. I am also looking for any help in splitting the tractor as I have to replace the clutch assembly. Thanks in advance for any assistance. :good:

      • April 7, 2018 at 8:09 am #47771
        DavidPrivett
        Participant
          • Offline

          I would start looking at the quick connects if it has them and the control valve ,does the engine sound like it is under a load when you activate the joystick?

        • April 9, 2018 at 8:11 pm #47779
          Roger
          Participant
            • Offline

            No the engine remains at idle with no change to rpms or sound. All quick disconnects are attached.

          • April 9, 2018 at 8:46 pm #47780
            DavidPrivett
            Participant
              • Offline

              have the disconnects been connected in place since it last worked? If they have I would assume they are plumbed properly. Does the backhoe run off the loader pump?  Or does it have its own off the pto .

            • April 12, 2018 at 2:12 pm #47783
              kenotractors
              Participant
                • Offline

                It sounds to me as if your main hydraulic pump on the tractor has failed as the backhoe is run off its own hydraulic system. I would begin by checking there.

                Check out our Guides and Videos page on our Keno Tractors website and we have instructions on how to split your tractor as well as how to adjust your clutch.

                Guides and Videos: https://www.kenotractors.com/online-tractor-support-help/

                If you have any additional questions or would like to identify your hydraulic pump you can contact me directly by email at tyler@kenotractors.com or by phone at 866-363-8193

                Tyler Nystrom
                Keno Tractors
                parts@kenotractors.com
                866-363-8193
                Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.