farmpro 2430 ty395e engine transmission |

This topic has 5 replies, 2 voices, and was last updated 4 years, 3 months ago by DavidPrivett.

Viewing 4 reply threads

Author

Posts
- July 27, 2020 at 12:52 pm #49429
  Victor Nickel
  Participant
  - Offline
  how to remove and replace 1st-reverse shift fork and the shaft. the fork is broke.
- July 30, 2020 at 6:55 am #49432
  DavidPrivett
  Participant
  - Offline
  have you pulled the cover off that the shifter is mounted in. I seem to remember someone having a retainer pin fall out that hold the fork in place , it acted like a broke fork.
  - July 30, 2020 at 9:40 am #49433
    Victor Nickel
    Participant
    
    Offline
    yes i have the cover off it is broke in half . i just found a way to remove it and replace it. if i move the shaft toward the back passed what would be reverse (there are 3 indents in the rod 1 for reverse 1 for netural 1 for 1st gear with a spring and ball bearing in the back case to hold the rod in place) it will move back passed reverse until the rod comes out of the front case and allows me remove the roll pin and replace the broken fork thanks
- July 31, 2020 at 6:30 am #49437
  DavidPrivett
  Participant
  - Offline
  is the fork some kinda cast or is it stamped metal, I was wondering if you were gonna try weld it back together.
- July 31, 2020 at 10:30 am #49438
  Victor Nickel
  Participant
  - Offline
  the forks are cast . I bought a new one from circle G tractors $28 a gasket $11. and $11. shipping
- July 31, 2020 at 3:17 pm #49439
  DavidPrivett
  Participant
  - Offline
  yeah being cast you are better off replacing good luck on the reassembly
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.