284 can’t get lever to go into reverse |

This topic has 6 replies, 3 voices, and was last updated 1 month, 2 weeks ago by wood teach.

Viewing 6 reply threads

Author

Posts
- October 3, 2024 at 10:46 am #50307
  wood teach
  Participant
  - Offline
  Can’t get lever to go into reverse position
- October 3, 2024 at 12:29 pm #50308
  Piper184
  Participant
  - Offline
  Does it make a grinding sound when you try it?
  
  Does it go into 1st, 2nd, and 3rd OK?
  
  If it is gear grinding it is probably a clutch that needs adjusting.
  
  If it doesn’t grind and the shift lever feels like it is hitting a block, there is probably something wrong in the transmission. Probably something wrong with the shift fork.
  
  Easy enough to pop the top cover off and have a look.
- October 5, 2024 at 8:27 am #50313
  DavidPrivett
  Participant
  - Offline
  is this a standard trans type or a shuttle shift??
- October 6, 2024 at 7:39 am #50315
  wood teach
  Participant
  - Offline
  Sorry for the late reply I had a family emergency and was away from home, thank you for your help. The lever on the steering column can be pushed up for forward but cannot be moved down for reverse
- October 6, 2024 at 8:34 am #50316
  DavidPrivett
  Participant
  - Offline
  ok that is a shuttle shift, I would seperate the linkages at the transmission and operate the shifter to see if there is any binding. if all is smooth the transmission forks might be at fault. Have you tryed to move the tractor forward some distance and try reverse again? also have you checked your free play on the clutch ,it should be about 1 inch.
- October 6, 2024 at 8:36 am #50317
  DavidPrivett
  Participant
  - Offline
  the shuttle shifts have problems with the pins that hold the linkages together breaking this could be your issue also.
- October 6, 2024 at 8:43 am #50318
  wood teach
  Participant
  - Offline
  Thank you I’ll give it a go
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.