amerequip backhoe hyd oil

Forum Forums Tractor Implements amerequip backhoe hyd oil

Viewing 6 reply threads
  • Author
    Posts
    • #31039
      35xtd
      Participant
        • Offline

        This is the backhoe nortrac sells with there dozer it’s time to change the oil and filter and I was wandering what kinda oil every body’s using in theirs. the book says sae 10w40 sf/sg…does that sound right for hyd oil..was wandering if aw32 would b a better oil…thanx

        35xtd Dozer and hoe..1610d yanmar tractor

      • #37830
        35xtd
        Participant
          • Offline

          Don’t know how it posted twice..lol..sorry

          35xtd Dozer and hoe..1610d yanmar tractor

        • #37831
          Bob Rooks
          Participant
            • Offline

            Wander no more. Wonder no more.

            The book says to use multi-grade engine oil? Sure, it will work, and so will water, gasoline, diesel fuel, and hydrochloric acid. I've heard Northern make some ignorant statements before, so I'll just add that one to the list. The best oil you can use (IMHO) in it is a multi-grade hydraulic oil [AW ISO 32/46/68]. If that's not available to you, then (depending if you operate in a hot or cold climate) AW ISO 32 or AW ISO 46 hydraulic oil.

            Account deleted.

          • #37832
            35xtd
            Participant
              • Offline

              Thanx bob..every piece of equipment we use underground is hydro…never heard of engine oil in hydrolic thought maybe these was some kinda special pumps…what would be a good filter it’s got a zinga ae25 its a 25 micron…a napa 1553 is a cross but it’s a 33 micron filter

              35xtd Dozer and hoe..1610d yanmar tractor

            • #37833
              Bob Rooks
              Participant
                • Offline

                Since it's a return line filter, and you don't have a suction side filter, I would stick with the 25µ filter. NAPA probably has a comparable hydraulic filter. Zinga filters are a good quality and quite popular Available at most hydraulic shops, and online through sites like Surplus Center. http://www.surpluscenter.com/s…..rds=filter

                Account deleted.

              • #37835
                DavidPrivett
                Participant
                  • Offline

                  just as a bit of almost useless knowledge the old john deere model g used 30 wt engine oil in the hydro. rear 4 point lift systems. I think the idea was one oil for everything.

                • #37838
                  Bob Rooks
                  Participant
                    • Offline

                    Yes, that's true, but that only works if the tractor manufacturers and oil companies work together. Formulating additive packages for oil base stocks is not an easy task and can take years of research. So the simple rule of thumb is: Engine oil for the engine, hydraulic oil for the hydraulics, gear oil for the gears, and grease for the joints. Some later model tractors have been designed to work with the fairly recent advances in base stock compounding, and specify the use of UTF and THF oils.

                    Account deleted.

                Viewing 6 reply threads
                • You must be logged in to reply to this topic.