Backhoe Valve

Forum › Forums › Help Me Find A Part › Backhoe Valve

Viewing 6 reply threads
  • Author
    Posts
    • March 24, 2019 at 11:12 am #48702
      Cvin536
      Participant
        • Offline

        Need a replacement valve for 2003 frame mounted backhoe on 25HP FarmPro tractor
        Cvin536@live.com

      • March 24, 2019 at 1:59 pm #48703
        Bob Rooks
        Participant
          • Offline
          Cvin536 wrote:

          Need a replacement valve for 2003 frame mounted backhoe on 25HP FarmPro tractor Cvin536@live.com

          Quote

          You must be more specific, as the backhoe is not the same brand as the tractor.

          Which valve do you need, or do you want the entire valve stack?

          Here is a complete USA made universal valve stack you can adapt with fittings.

          https://www.surpluscenter.com/Hydraulics/Hydraulic-Valves/Directional-Control-Valves/6-Spool-Hydraulic-Valve-w-Joysticks-Prince-SV-9-7502.axd

          Here is a Chinese backhoe valve stack, but they are out of stock. Maybe call them to verify.

          https://www.circlegtractorparts.com/jinma-backhoe/backhoe-hydraulic-valve-assembly

          Account deleted.

        • March 27, 2019 at 2:56 pm #48711
          Bob Rooks
          Participant
            • Offline

            Book slammed shut again. Don’t know if I was helpful or not. 😥 😥

            Account deleted.

          • March 27, 2019 at 6:57 pm #48712
            Tinbender
            Participant
              • Offline

              You can lead a horse to water…

            • March 28, 2019 at 1:10 pm #48713
              Cvin536
              Participant
                • Offline

                Bob

                I talked to the guy from ciclegtractor parts and he refered me Keno tractors here in Oregon. Apparently nobody seems to have this Valve available at this time. My backhoe book that came with the tractor says that is JW03. Keno tractors says they a shipment coming from China in about 6 weeks but she had not got ahold of the manifest.

                Attachments:
                You must be logged in to view attached files.
              • March 28, 2019 at 1:14 pm #48715
                Cvin536
                Participant
                  • Offline

                  Sorry the pic I sent is not correct. Mine has 6 hose connections on top with 8 more just below those. Will try to send beter pictures. As far as using an upgraded valve and changing all the fitting it sounds like to much hassle.

                • March 28, 2019 at 7:29 pm #48716
                  Bob Rooks
                  Participant
                    • Offline

                    I used to have a LW-6, which is the same as a Jw-03. It was always blowing cup seals in the boom and jib cylinders. General operation was very jerky regardless of how I feathered the controls, PLUS I didn’t have float or compound movements. I unloaded the LW-6 and bought a Korean LiTW BH7600 backhoe. It was as smooth as silk, powerful, had float and compound controls. It had an Italian valve stack, and all the fittings were JIC. It was a great little hoe but it still lacked what I needed so I sold it and bought an excavator (should have done that in the first place). Also, the LiTW had a power beyond port so I could have installed a hydraulic thumb.

                    So, what makes you think you need a new valve stack, if I may ask?

                    Account deleted.

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.