Forum › Forums › Help Me Find A Part › Big big problem
- This topic has 9 replies, 4 voices, and was last updated 12 years, 5 months ago by Affordable.
-
AuthorPosts
-
-
July 18, 2012 at 9:13 am #30622
I have a Jinma model 284. One of the rocker arms broke causing damage to other parts in the cylinder head assembly. My diesel repair place has been trying to find replacement parts but with no success. They have discovered this engine has been discontinued and China is not making any replacement parts for it. I am now going to the Internet for help and suggestions. I have three options.
1. If I can find a used (or new) cylinder head assembly including head gasket, rocker arms, push rods, and rocker arm hold downs they can repair the tractor.
2. Trade the tractor to a dealer who needs the parts for a new tractor.
3. Sell the tractor for parts.
It has less than 100 hours, I only used it to plow snow off our driveway (one mile long). It does have a very good, heavy duty front end loader.
Any suggestions or advice is greatly appreciated.
Thank you
Mike
-
July 18, 2012 at 10:46 am #34893
Mike,
Contact Tommy at Affordable Tractor Sales – tommy@affordabletractorsalesco.com or check their website at http://www.affordabletractorsalesco.com/ or call him at the numbers listed in their ad in our advertisers/ sponsors section. If he doesn't have what you need, I'd frankly be astonished. Either new or used, I'm sure he can help you out – plus, he's a veritable font of great advice and assistance for all of us.
-
July 18, 2012 at 4:11 pm #34895
Rich,
Thank you for the reply. I sent the message to Affordable Tractor Sales and Tommy did get in touch with me. I passed him on to the diesel repair place and they are getting Tommy the data he needs (engine mfg). So something is happening.
Mike
-
July 19, 2012 at 5:01 am #34898
Mike, I did not hear back from the Mechanic, I talked to my guy in China last night about Quanchai parts, and he said they only made that engine for a short time, and do not supply any spare parts.I think this is the engine you have, since your mechanic has not been able to find any parts.Yangdong, Laidong engine parts are in very good supply but that does not help you.
Hopefully your mechanic will call with some good news that it's not a Quanchai engine.
If it is, your choices are to change out the engine to a Yangdong or sell the tractor for parts.I keep complete crated engines in stock but they are not cheap.
QUOTE:
Tommy ,As I told you before, quanchai factory has stopped this type of engine, so it is very hard to get the parts.Plus the factory has no intention to supply the parts for their engines sold before.TommyAffordable Tractor Sales“Your Jinma Parts Superstore” -
July 19, 2012 at 7:19 am #34899
Tommy
It is the unavailable engine. So I am screwed for parts. My options now are to either sell the tractor for parts or trade it in (for parts) for another tractor.
Thank you for your time and attention to this.
Mike
-
July 19, 2012 at 7:56 am #34901
Sorry we could not help you, this same problem will effect every Jinma tractor owner that has that Quanchai engine, we cannot even get water pumps for it.
Jinma only used this engine during the time they were trying to find a engine that would meet the new EPA requirements, once Yangdong and Laidong got the approval they went back to them.
I would assume that Quanchai got mad at Jinma about the short time use and now has refused to supply parts to anyone for that engine.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
July 19, 2012 at 8:20 pm #34902
Well maybe some good news, I got a reply back from Quanchai, they have stopped making that engine, however they are going to see what parts they still have, I told them I would take whatever parts he had left.I asked about complete head assemblies, gaskets, water pumps, ect.
UPDATE: Mike call me today,I can get the head assembly and gaskets
I have a container leaving in week I can get these added onto
I should know something in a few days on what he has
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
July 20, 2012 at 4:52 pm #34904
Thisis precisely whay, whenever anyoen asks aboutparts, I always recommend Tommy at Affordable Tractors. Even after the factory told him there was no hope, he persevered and found a solution for this guy. All that work for a sale that can't possibly net him sufficient profit to break even on the deal. That is what I call CUSTOMER SERVICE!
My hat is off to you once again, Mr. Laskowski!
-
July 20, 2012 at 5:14 pm #34905
I second what Rich said.
Way to go Tommy!
Account deleted.
-
July 20, 2012 at 9:49 pm #34906
Well thanks for the compliments guys, this engine has been almost impossible to get parts for from the start.Hopefully I will now have some in stock for other customers as well .I knew if I could just get somebody to talk to me I could get the info. I was looking for and it worked.
Sometimes things just work out !!!!
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
-
AuthorPosts
- You must be logged in to reply to this topic.