Big end bearing for xm-14 xuzhou Loader

Forum › Forums › Help Me Find A Part › Big end bearing for xm-14 xuzhou Loader

Viewing 4 reply threads
  • Author
    Posts
    • February 21, 2014 at 5:57 am #30864
      Narelle Robinson
      Participant
        • Offline

        hailkingPLEASE HELP ME FIND A SUPPLIER FOR A SET OF BIG END SLIPPERS FOR MY XUZHOU LOADER. ENGINE IS 15 HP HORIZONTAL DIESEL. CRANKSHAFT IS 65MM OUTER DIAMETER OF BEARING IS 70 MM AND THEY ARE 30 MM WIDE.

        PART NUMBER ON BEARINGS IS S195  C-RA      0.00  914

        SURELY A SUBSTITUTE BEARING FROM ANOTHER MACHINE WOULD BE AVAILABLE IN THAT SIZE.

        PLEASE HELP ME FIND A SUPPLIER

        ROBBO

      • February 21, 2014 at 7:19 am #36785
        bg
        Participant
          • Offline

          Try Grainger.com      Their local store told me they could get any bearing ever manufactured.  They did find a match for my 1954 Trojan loader wheel bearing.  BG

        • February 21, 2014 at 10:51 am #36786
          RichWaugh
          Participant
            • Offline

            As noted, try the big industrial suppliers:  McMaster-Carr, MSC Industrial Supply, Boston Gear.  You may have to slightly modify and off-the-shelf shell, but it can be done.

            Worst case scenario, you wind up pouring babbit bearings in place.  That may be an old-fashioned method, but it works every time if you know what you're doing.

          • February 22, 2014 at 4:01 am #36787
            Narelle Robinson
            Participant
              • Offline

              Thank's for the leads I am following up now

              Thank's

              Robbo

            • February 25, 2014 at 11:36 am #36791
              Bob Rooks
              Participant
                • Offline

                If I'm not mistaken, Robbo is looking for a plain bearing insert not an anti-friction bearing. I suggest Monmouth or Federal-Mogul bearings. If you have the old bearing take it to a GOOD automotive machine shop and they can match it up. It may cross reference over to a Yanmar, Mitsubishi, Kubota, Lai Dong, or Jai Dong, etc.

                Account deleted.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.