dipstick

Forum › Forums › Tractor Troubleshooting › dipstick

Viewing 4 reply threads
  • Author
    Posts
    • June 20, 2011 at 12:40 pm #30338
      joe62
      Participant
        • Offline

        were will i find the dipstick for the fuel injector pump i have a fram pro 24/25

      • June 20, 2011 at 3:40 pm #32604
        Halifax
        Participant
          • Offline

          If the Farmpro 2450 is the 25hp Jinma, you probably do not have a dipstick for the fuel injector.  There should be 2 drain plugs on the bottom.  On the left side of the injector (towards the radiator beside the Banjo fitting) there should be a screw with a tube facing downwards.  This is the bleeder screw, so as you fill it with oil it will drip out of the tube.

          I can't find a picture right now, but hopefully you get the idea.

          Aubrey

          God is Great, Beer is Good, and People are Crazy! '07 Jinma 254LE

        • June 20, 2011 at 3:48 pm #32605
          Halifax
          Participant
            • Offline

            Not that good of a picture but it should help.

            Aubrey

            Fuel injector

            God is Great, Beer is Good, and People are Crazy! '07 Jinma 254LE

          • June 20, 2011 at 5:07 pm #32606
            joe62
            Participant
              • Offline

              thanks you are right no dipstick now were do i add oil at

            • June 21, 2011 at 4:11 pm #32611
              Halifax
              Participant
                • Offline

                You can't see it in the picture, but on the upper right is a breather cap, you need to remove it.  Its the same hole to fill up.  Just fill up a little at a time, it take a bit to run from one side to the other…

                Aubrey

                God is Great, Beer is Good, and People are Crazy! '07 Jinma 254LE

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.