Forum › Forums › Bulldozer & Excavator Troubleshooting › Fan Belt
- This topic has 4 replies, 3 voices, and was last updated 8 years, 2 months ago by Bob Rooks.
-
AuthorPosts
-
-
September 3, 2016 at 7:28 pm #46347
The fan belt broke on my Nortrac Dozer. The engine is a TY395T . Model YCT306S-S . The belt looks original with chinese writing also says B-1000 on the belt. Does anyone know if there is a cross Ref. for a aftermarket belt ?
Thanks !
Scott
2005 NB3500 Nortrac Dozer -
September 3, 2016 at 10:54 pm #46348
Any parts house worth a plug nickel will have a belt gauge to match it up with.
-
September 4, 2016 at 2:48 am #46349
What Tinbender said. If I remember correctly it’s a 42″ B-belt. I switched to a Fenner Drives polyester linked belt purchased at Harbor Freight when I switched alternators.
Account deleted.
-
September 6, 2016 at 11:17 am #46358
What Tinbender said. If I remember correctly it’s a 42″ B-belt. I switched to a Fenner Drives polyester linked belt purchased at Harbor Freight when I switched alternators.
No one had a B42 belt. So i got a Fenner belt at Harbour Freight in columbus Ohio. Works Great ! Thanks for your help.
This dozer needs alot of attention. The brakes need new liners and oil seals . I am going to need some advise when i get time to tear it down someday.
Bob Rooks- I am going to look into the PVC Mod here soon.I work with a couple of X Diesel Mechanics. They said what you told me about the engine oil sucking into the intake {Runaway}.
Thanks Again !
Scott Neff -
September 6, 2016 at 1:41 pm #46361
What Tinbender said. If I remember correctly it’s a 42″ B-belt. I switched to a Fenner Drives polyester linked belt purchased at Harbor Freight when I switched alternators.
No one had a B42 belt. So i got a Fenner belt at Harbour Freight in columbus Ohio. Works Great !
I wasn’t 100% positive about the 42″ length, but glad you got the linked belt anyway. You’ll find that it will need a couple of adjustments before it gets stretched out.
Account deleted.
-
-
AuthorPosts
- You must be logged in to reply to this topic.