Flail mower

Forum › Forums › Tractor Implements › Flail mower

Viewing 4 reply threads
  • Author
    Posts
    • May 10, 2018 at 8:54 pm #47871
      Carl Darnell
      Participant
        • Offline

        Has anyone tried or is using a flail mower with the 25 hp Jinma tractor.

      • May 11, 2018 at 12:30 am #47872
        Bob Rooks
        Participant
          • Offline

          Probably irrelevant, but I use a 68″ flail behind my 30 HP dozer through 6′ high scotch broom with no problems. You should have no problem with a 48″ flail.

          Attachments:
          You must be logged in to view attached files.

          Account deleted.

        • May 11, 2018 at 7:09 am #47874
          Carl Darnell
          Participant
            • Offline

            A friend has a Betstco Flail mower and I have been doing searches about them. I am planning to use a 60″ mower. What I am concerned about is our land is NOT level. it’s like riding a roller coaster when mowing it. It’s bumpy and has shallow washes. I am mowing the roughest part of the land today and will ask my friend to make a few passes with his mower to see how it does.

            I decided to ask here even though I haven’t been on this site in a few years. Man! This site looks strange compared to what it was and how other forums are laid out. WOW, not fond of it at all.

          • May 11, 2018 at 6:35 pm #47878
            DavidPrivett
            Participant
              • Offline

              a flail mower has less distance front to back so it should work easier on that type ground than a finishing mower or ruff cut rotary mower. and we have learned to adjust to the site  with time.

            • May 11, 2018 at 8:06 pm #47879
              Carl Darnell
              Participant
                • Offline

                Thanks for the replies. My friend brought his tractor and mower and made a few passes on the roughest places and it did a very good job. I think I will order one next week.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.