fuel filter replacement

It would be helpful to know what model of Jinma tractor and what engine it has in it. The year built would help too.

Also, which fuel filter are you wanting to change?

Are you having a specific problem or are you just doing preventative maintenance?

There could be a strainer inside the fuel tank.

There should be a sediment bowl with screen under the fuel tank.

There may be another strainer inside the fuel pump where the inlet hose is connected.

The main filter, sometimes called a secondary filter or final filter is probably a spin on unit like the oil filter. Jinma used different mounting setups on different machines and in different years. Some have metric threads and some have imperial threads. About the only way you can tell for sure is to get the number off the old filter, if it is visible, or remove the old filter and measure it.

I have a filter cross over chart and can probably find a suitable domestic filter if you can tell me the number of the original.

I have the same tractor except it was built in 2006.

Most likely your fuel filter number from Jinma is CXD706. If it is the original filter the number may be faded out and you won’t be able to read it. However, I don’t see any different numbers except a possible Yangdong number of Y385T-10500, which I have no cross reference for.

Do the fuel lines go in and out of the adapter directly opposite of each other or is one of them on the top? If opposite, it is most likely the CXD706.

In this case you can use:

NAPA 3195

FRAM P6503

AC TP1247

WIX 33195 (WIX makes the NAPA filter, NAPA just drops the first digit of the WIX number.

the napa 3195 is a very popular filter for use in many machines of all kinds of makes and appiclations.