Fuse box plug pin layout |

This topic has 9 replies, 5 voices, and was last updated 13 years ago by TGS.

Viewing 9 reply threads

Author

Posts
- November 5, 2011 at 7:05 am #30444
  TGS
  Participant
  - Offline
  I am searching for the fuse box plug pin layout . I have a wireing layout and want to get then battery light and oil light working on my Cluster . There is not wire on the wiring harness for the lights I know it number 41 but can not find where 41 would be on the plug to match it to the wire on the fuse box.
  
  it would be good to have as it the little tags come off the wire could always look at the pin layout to see what that are
  
  Thanks
  
  Thomas
- November 12, 2011 at 11:25 am #33666
  circleg
  Participant
  - Offline
  Go to http://www.circlegtractorparts.com
- November 12, 2011 at 6:09 pm #33679
  TGS
  Participant
  - Offline
  They have the pin layout there ?
  
  I looked for it there but did not see it in fact you should find it and send it to me as I purchased my tractor for you and the wiring Harness that on my tractor does not have the wries to make the dash battery and oil warning light work
- November 12, 2011 at 10:23 pm #33680
  oldfart2
  Participant
  - Offline
  TGS
  
  HI. You really should contact the seller in private, to try to work out a problem. I'm sure they will try to help you!
- November 13, 2011 at 8:55 am #33681
  TGS
  Participant
  - Offline
  Yes maybe I should have
  
  but if you see from my question I was looking for info not to buy a part and when he reply to to parts department I told hime how I felt.
  
  I did not make this post to complain about anything .
- November 13, 2011 at 11:44 am #33682
  RichWaugh
  Participant
  - Offline
  I'm confused – didn't you get the same question asked and answered on another forum? The person who answered the question stated that he had drawn the diagram himself, so it is evidently not available elsewhere, is it?
- November 13, 2011 at 12:03 pm #33683
  Bob Rooks
  Participant
  - Offline
  I have never seen a pinout for any of these tractors. I don't believe they exist in the free world. Doing your own pinout can be done, it just takes time and patience. Or you can contact Jinma directly to see if one is actually available.
  
  Account deleted.
- November 13, 2011 at 4:37 pm #33684
  TGS
  Participant
  - Offline
  Hard to make one when wire are missing
  
  if you want one Tractorbynet was question as here
- November 13, 2011 at 5:39 pm #33685
  Bob Rooks
  Participant
  - Offline
  Does your voltage regulator have a red LED that's lit when the engine is running?
  
  Account deleted.
- November 13, 2011 at 5:46 pm #33686
  TGS
  Participant
  - Offline
  no it does not it is a 5 pin one
  
  I am trying to get the battery light hooked up that whay I was seeking the pin layout
Author

Posts

Viewing 9 reply threads

You must be logged in to reply to this topic.