How to get rear hydraulics to work?

If your FEL control valve has a Power Beyond Port you simply plumb your supply to the grapple off of that, as I understand it.  Your valve would have to have both the Power Beyond capability and have the Power Beyond adapter installed in the port. Without a power beyond port you'd need to get your hydraulic supply elsewhere.

As I understand it, to make the rear remotes function you have to close the drop control valve under the front of the seat.  The TPH then stays up and the remotes are active.  That may not be what you want so you'd have to either go with the Power Beyond or tee into the line returning to the sump from the FEL valve or somewhere else.

Hopefully, someone else will have a better solution.

I added two rear and two front remotes to my Jinma 284 and will gladly send you the schematic as well as low cost source links for DIY hoses, valves, etc.  I was able to do this with a lot of help from 3RRL.

Steve,

I'd be interested in the schematic, etc – but I no longer know how to PM you since this site has changed.

RonJ

Ron, you have to request him to be a friend, once he's one of your friends you can click on his avatar and PM him. Only problem, I can't for the life of me remember how to do that.

Steve,

I'm interested as well, can you post it in here.

Tin,

Are you really telling me that in order to send a simple PM to another member on this 'new' site, it is necessary to go through the “social network” garbage?

RonJ

I don't know how to post it so just send an email to me:  anderson@gdsconsulting.com

Ron, I'm afraid so. I don't do facebook or any other social network so I don't know anything about how they work

Steve, mind if I bother you for a copy?

Sure, just send me an email and I'll pass it along.

Wow ! I also would love an email of that. fidowanttobe@yahoo.com  Might have opened a can of worms here. You may be emailing this to the entire membership. Thank you !

The schematic, my own parts list, and photos were sent to everyone who requested it.

Ron J thanked me and I appreciate that.

I did not reply a thanks to your e mail

Thank You, I appreciate your taking time to e mail that info to me, and I mean that sincerely.

I hope this helps everyone and maybe someone can post the schematic?  I have a 30 year hydraulics background but could not have added the front and rear remotes and made up all the hoses without the help of 3RRL on TractorByNet.

I use the rear remotes to plug in my logsplitter and I use the front remotes to angle my loader mounted snowplow.

Making your own hoses is so simple and after adding all the Prince stacking valves and Pressure Relief Valve (PRV) I've had no leaks at all.  I keep extra hose and fittings on hand for repairs.  If I can do this, anyone can do it.

All of this is especially useful for logsplitters, grapples, etc.  Now that I just bought, factory direct from China, a backhoe, I will make up some “legs” for the logsplitter so that I can lug it to the splitting area, plug it in, and heat my house for free this winter.

Steve,

Thanks for your email with schematic and bill of materials used, much appreciated.

Mike – you should have it now. 

Thank You. Now I need to find some SPARE time !

SmallJobs I am late to the thread, but could you send me the list and schematics @ mspcpa@swbell.net? And thanks in advance.

Could You also send it to me, ireland2wh@frontiernet.net. Thank You

Can I also please get a copy of that list and schematics.    hoops-02@hotmail.com

thank you!!!!

Small Jobs

Looking at the date on this thread it has been some time since it originally ran but if it isn't too much trouble I'd be interested in seeing the information you have. Could you send it to joe.kane@Bruker.com

Thanks in advance

Joe

Joe, I'm in China now and sent the email pkg a couple of times but the outgoing email times out.  If you don't get it, I'll resend when I'm back home in a few days.

If you get 5 copies of the same email….

SmallJobs I am late to the thread, but could you send me the list and schematics @ mark@pearson-cpa.com? And thanks in advance.

smalljobs I am also late at getting to this thread, but it sounds like the information you have is what I have been trying to find. Can you send me the schematics as well.  thanks, mike

schlagelm@gmail.com

Mike – sent you the material.  Are you all set now?  How about others whom I sent it to….was it helpful?

SmallJobs, as others have said this thread has been around for a while, but if you still have your parts list and blue print to adding  to the hydraulic system I would very much appreciate a copy sent to me also.

mmolnar@new.rr.com Thanks in advance

Mike M. /Michigan

I would also like a cope if still available. Thanks in advance

ireland2wh@frontiernet.net