hydraulic hose for NorTrac 254….

Forum › Forums › Tractor Operation And Maintenance › hydraulic hose for NorTrac 254….

Viewing 2 reply threads
  • Author
    Posts
    • April 19, 2017 at 9:27 pm #46895
      wmlroy
      Participant
        • Offline

        I need a hydraulic hose for the above tractor….it is 11″ in length and has a 20mm banjo connector/fitting that bolts to the fluid distributor….I have the banjo bolt….the other end of the hose attaches to a quick release coupler…I have that part also….

        Apparently the newer tractors allcomewithan18mm banjo bolt and connector….the 20mmseems to be’ older  parts’.

        Can I get some kid of reducer bushing I can screw into the side of the bolt hole on the distributor housing that could reduce that hole to an18mm hole to accept the18mmbanjo olt

      • April 19, 2017 at 10:20 pm #46896
        Piper184
        Participant
          • Offline

          Try these guys. If nothing else, they may be able to custom make the hose you need.

          http://www.clearwaterhydraulics.com/index.php/

           

        • April 21, 2017 at 6:52 pm #46901
          wmlroy
          Participant
            • Offline

            thanks…..I have been checking everywhere I can and finally found a hydraulic hose shop near my home town and took the old hose in…he put some calipers to it and made me a new hose in 10 minutes….didn’t even know there was such a shop available—but thought  why not…back in business…thanks for the tip

            Will

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.