Forum › Forums › Tractor Operation And Maintenance › Hydraulics
- This topic has 23 replies, 6 voices, and was last updated 11 years, 2 months ago by DavidPrivett.
-
AuthorPosts
-
-
September 19, 2013 at 12:57 pm #30818
Hi guys i have a generic tractor (taishan 254) but called CKC on the side.
I have some pics i'm sharing.
My problem with the tractor is that I am trying to get the hydraulic lift to work.
Got the PTO shaft to engage finally – was having a bit of a challenge on getting it out of neutral.
Now that the PTO is engaged, the lift should work unless the pump is not functional above the PTO .(?) Am I missing something here? Is there a quick way to determine if pressure is being built up? also checking the level under the seat without a dipstick (as there is no dipstick) how does one check the fluid level?
I just bought this thing without a manual so if anyone has an electronic version.. let me know.. this one is similar to others out there..
Thanks in advance
-
September 19, 2013 at 1:28 pm #36413
I'm not familiar with a Taishan, but on other Chinese tractors, the PTO should have nothing to do with the 3-point hitch working. That should run off the main hydraulic pump, not off a secondary pump. Most of the 25 hp series of Chinese tractors use one engine-mounted and driven hydraulic pump to handle the power steering, FEL and TPH. How is your Taishan plumbed?
-
September 19, 2013 at 3:39 pm #36414
Hi Rich. I'm new to this but i have posted some pics at monkbutter.com
take a look because i was told the rear pump was the main on the TS tractors, and the engine mounted was the steering. minmd you this is a 1998
-
September 19, 2013 at 4:25 pm #36415
Anyone have a parts manual to something comparable?
-
September 19, 2013 at 6:34 pm #36416
The link you posted seems to be invalid. Have you traced the hydraulic plumbing on your tractor to see where it goes?
You might try posting your request on this site: http://tractorbynet.com/forums…..-tractors/ to see if you get a response, I believe one of the regular posters there formerly owned a Taishan and may have the manuals available.
-
September 19, 2013 at 7:00 pm #36417
I found the Manual and the Steering Hydraulic plumbing info.
-
September 21, 2013 at 2:52 am #36419
seriously, 15$
???
-
September 21, 2013 at 1:47 pm #36421
That's a bargain, considering a set of manuals for a Cat D3 can run around $450.00.
Account deleted.
-
October 3, 2013 at 3:13 am #36432
Well, I don't feel like its a bargain. I would like a refund through paypal. Already initiated it. Thats 15$ that I need.
-
October 3, 2013 at 9:47 am #36433
I'm not trying to be mean so don't take this the wrong way, but if you are doing your own repairs on an unfamiliar piece of equipment and can't afford a measly $15 bucks for a manual, how are you going to afford the repairs? Especially the problems you create because you don't have a manual, that cost more than $15 to fix?
-
October 3, 2013 at 1:04 pm #36434
You don’t feel like it’s a bargain??
What do you consider a bargain to be anyway?
If you don’t have $15.00 for a manual, then you don’t have $15.00 for parts.
Good luck to you.
Maybe he's referring to the $15.00 CTOA membership fee.
Account deleted.
-
October 3, 2013 at 1:31 pm #36437
If $15 is a deal-breaker, then you best not own a tractor or any other piece of equipment that moves.
-
October 3, 2013 at 3:09 pm #36438
I think he's gone.
Account deleted.
-
October 3, 2013 at 6:04 pm #36439
Some people expect something for nothing and you just can't please them no matter what you do. If his beef is with $15 for manuals, he's living in a past era and if his beef is with the $15 to support this site, then he's not serious about being a part of the community here. Either way, it's his choice and no skin off my nose.
-
October 4, 2013 at 3:59 am #36440
Tinbender, I'm referring to membership. And I did fix the problem without a manual.
Rich, its not 'something for nothing', it's nothing for 15$.
The logic is backwards. I asked on my first post for a manual and you responded to go to TBN and try posting there -maybe i'd have some luck with finding manuals.. well wtf isnt this he Chinese Tractors Association or am i in the wrong place???
I went over to TBN and I found guys who I never gave a penny to guiding me through it, who dont even own Chinese tractors, so obviously I want my money back..
Is that illogical if I don't consider it a bargain?
-
October 4, 2013 at 5:52 am #36441
As I said, if you think $15 is too much money to support a site that provides a forum for owners to exchange information, then you obviously don't want to be par tof the community here. I have no problem with that – we can't please everybody all the time. But you should know that a site like this takes money and effort to maintain and I think it only fair that Hal gets some support from those who derive benefits from the site. Fifteen bucks is less than dinner and a movie, after all. If fifteen bucks means the difference between eating Little Friskies and tuna fish, then I'd say you really can't afford to own a tractor at all. But that's just my opinion and does in no way reflect the opinion or policies of this site or its owner. Personally, I think fifteen bucks is a bargain for all the knowledge I've gained from the members here over the years. Your mileage, as they say, may vary.
Of course, it was here that you were referred to TBN where you found the guy I was referring to – you think that's worth nothing? Tell you what – since the fifteen bucks is such a big deal to you, send me your address and I'll send you the fifteen bucks. Then you won't have any reason to think you've been taken advantage of. Fair enough?
-
October 4, 2013 at 3:39 pm #36442
you won’t get any money back. You were provided a service and accepted the terms. This site is supported by the members not advertising. Easy as that.
Enjoy your tuna fish.Account deleted.
-
October 4, 2013 at 9:01 pm #36443
Thanks Rich, Bobs right I did agree to the terms. Tuna it is.
-
October 4, 2013 at 11:05 pm #36444
Stick around, I think you'll find that your fifteen bucks was actually a very worthwhile investment in peace of mind, abstract information not available elsewhere and just plain fun. Bob Rooks is incredibly knowledgeable about diesel mechanics across the whole spectrum form little Chinese tractors to whomping big ocean-going vessels and the other guys here have lots of knowledge about their respective tractors and other valuable minutia. Tommy from Affordable Tractor Sales is a frequent adviser here and always has accurate information and is also a great parts resource, as are the other dealers how participate here. Your membership fee is good for life (not just sure whose life), so you'll end up getting it back several times over in great advice if you stick around. We ain't pretty , but we are pretty good guys in general. Well, some of them are, anyway.
'
-
October 4, 2013 at 11:24 pm #36445
I like tuna too. 😉
Account deleted.
-
October 5, 2013 at 12:30 am #36446
Me too, but I'm learning to like the Little Friskies…
-
October 6, 2013 at 2:37 pm #36448
deserttbred, you wrote that the logic is backwards. I would like you to consider that your logic is backwards. Consider that every other person on this board also paid a fee. Should they pay a fee to help you? How about people that never ask for help but always provide help. They had to pay a fee in order to do that. Do you really think that you are getting the short end? Something to think about.
-
October 7, 2013 at 6:15 pm #36453
“Like”
Account deleted.
-
October 8, 2013 at 7:49 am #36454
good bye to a true bozo
-
-
AuthorPosts
- You must be logged in to reply to this topic.