- This topic has 7 replies, 4 voices, and was last updated 6 years, 9 months ago by
.
-
Posts
-
-
-
ON the JInma Key switch first stop to the right is accessories, if you will hold the key in the spring loaded position between accessory and start that powers the glow plugs, you should see a large amp draw when you first do it, hold it in that position for 15 seconds if the glow plugs are working,it should start a lot easier and faster
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
http://www.affordabletractorsalesco.com
979-865-4002 -
-
Our mechanic here at Keno Tractors made this short video today illustrating how to install a Jinma Ignition Switch and the proper prong identification. This video does use a JK290A Ignition and you can use the attached picture as guidance as well. If you have any additional questions you can get instantaneous feedback from our experienced staff by using the live chat feature on our website at kenotractors.com
How to Install a Jinma Ignition Switch
https://www.youtube.com/watch?v=6Bep2nRDtHM
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
Does your key switch look like this?
Nope….it has from left to right….Q o D Y Q on the label around where you put in the key…The tractor is a 2006 McConnell Marc 425xl (Jinma 254)..I tried to post a picture, but it won’t load…
-
Does your key switch look like this?
Nope….it has from left to right….Q o D Y Q on the label around where you put in the key…The tractor is a 2006 McConnell Marc 425xl (Jinma 254)..I tried to post a picture, but it won’t load…
the picture is one I copied from the net ,but the same as my jinma
-
Does your key switch look like this?
Nope….it has from left to right….Q o D Y Q on the label around where you put in the key…The tractor is a 2006 McConnell Marc 425xl (Jinma 254)..…
-
Does your key switch look like this?
Nope….it has from left to right….Q o D Y Q on the label around where you put in the key…The tractor is a 2006 McConnell Marc 425xl (Jinma 254)..I tried to post a picture, but it won’t load…
Ok, the key functions are the same as in my picture. Q=Start (Q on the left is start without glow plugs). O=Off. Y=Glow plug heat. Q=Start (Q on right is start with glow plugs).
Account deleted.
-
- You must be logged in to reply to this topic.