Forum › Forums › Tractor Operation And Maintenance › Leak on jinma 200
- This topic has 5 replies, 2 voices, and was last updated 10 years, 3 months ago by Affordable.
-
AuthorPosts
-
-
August 26, 2014 at 6:14 pm #30928
Have a 2005 tractor king 200 and it is leaking on driver side of engine . Appears to be coolant. Will attach picture of problem. It starts somewhere just under air intake hose and runs all the way down to the oil filter. I am new here as well as to Chinese tractors any help would be much appreciated. Thanks in advance.
I added the pic under photo album as I could not figure out how to attach to this post.
-
August 26, 2014 at 9:33 pm #37167
Send the pic to me at
tommy@affordabletractorsalesco.com
Maybe I can help you determine where its leaking from
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
August 28, 2014 at 5:13 pm #37173
Found the leak it’s coming from fuel injector fill cap which is a bolt. Also found what looks like a dipstick on fuel injector and when I pulled that out fuel shot out as if pressurized. My question is that normal or is there too much pressure causing the leak. Btw the fill cap bolt is tight.
-
August 29, 2014 at 5:36 am #37175
The pic you sent me was too big, are you talking about the injector pump ?
If you have pressure where the dipstick is on the fuel injector pump, you are going to have to replace that pump, there is nothing you can do to repair that,if you do not have experience with replacing these pumps I recommend you find a tractor shop to do it for you
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
August 29, 2014 at 2:37 pm #37181
Yes fuel injector pump and dipstick associated with that. It looks like it’s been running this way for some time, is it necessary to replace ASAP . Tractor runs fine.
-
August 30, 2014 at 6:05 am #37183
Fuel is leaking thru the internals of the pump to the governor, drain the governor see how long it takes to refill back up
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
-
AuthorPosts
- You must be logged in to reply to this topic.