Forum › Forums › Buying/Selling A Chinese Tractor › New Jinma 254 Tier 4 Complient
- This topic has 17 replies, 7 voices, and was last updated 9 years, 3 months ago by kenotractors.
-
AuthorPosts
-
-
November 11, 2014 at 12:59 pm #30966
Keno Tractors is proud to announce coming January 1st, we will be putting Perkins Tier 4 compliant engines in our Jinma 254 tractors. In addition to our 25 horsepower tractors receiving Perkins diesel engines from the UK, we are pleased to announce Keno Tractors will be putting Mahindra engines in all of our 354 and 454 Jinma Tractors. Eric, our owner, has been working closely with Jinma and Mahindra to make this all happen and this coming year will be exciting times for both Mahindra and Jinma. Please don't hesitate to contact us at 541-850-8193 or visit our website at kenotractors.com
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
November 18, 2014 at 11:36 am #37343
well, I guess I should have waited to buy one from you guys ha ha.
-
November 18, 2014 at 12:37 pm #37344
We have also heard of the Perkins UK engine as well as the Mahindra engines, we will see how this works out, at least they are working on getting some Tier IV engines back in the Jinmas for North Armerica.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
November 18, 2014 at 6:14 pm #37345
2 cents worth here, just bought a Kubota 39 hp with tier 4 engine as the 4 wheel drive went out on the jinma again and I was stuck to the frame in the field again. Impulse took over and the Kubota dealership is the closet tractor place to me. The tier 4 engine with the reburn system requires a minimum running rpm of 1800 and has problems if you idle at lower rpms for any period of time. Basically I was told start it, run it at 2000 rpm and if you stop working shut the tractor off, don't idle. Seems like a pretty sophisticated system, I hope the Chinese engineering is up to it. As for the jinma 4 wheel drive system there has got to be an upgrade that well stand up to working in wet grass and some mud. I tried the slug mod with 8mm bolts and got no better results.
thanks
-
November 19, 2014 at 9:30 pm #37347
for a
Jinma with a tier 4 Mahindra or Perkins engine what kind of a price are we looking at
-
November 20, 2014 at 11:22 am #37349
Thank you all for responding to our recent post. Here at Keno Tractors, we have been in close communication with Jinma and it appears as though we will be getting these tractors in early 2015. As most of you know, all tractor manufacturers are increasing the price of their tractors to comply with the EPA regulated Tier IV engines. Most of these companies will see a 3500-4500 dollar increase in the cost of the tractor. Fortunately for Jinma, the cost of these tractors won't be quite as high as these other companies. Our 254 Jinmas will be selling for $13,500.00 which will include the Perkins diesel. Our Jinma 354 and 454 will sell for $16,900.00 and $19,900.00. Both the 354 and 454 will be coming with the Mahindra Common Rail Diesel. In regards to the 454, we are excited to announce the Jinma 454 will be coming with a cab as well.
We will be announcing more details about these new Jinmas as we draw near to their arrival. Please visit our website at http://www.kenotractors.com periodically as we will be releasing more information about these tractors and other exciting moments.
JD Martin
Parts Manager
Keno Tractors
541-850-8193
Toll Free 866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
August 5, 2015 at 1:39 pm #38009
I see that the new 254's have not only the new perkins but a skidsteer style bucket disconnect that comes standard now. Is it compatable with my older 2013 Jinma 254 FEL?
-
August 11, 2015 at 11:11 am #38024
The Perkins are working out great! They run awesome and we have sold quite a few of them, with no problems. They fire right up, idle smooth, way more responsive, sound awesome and are by far one of the best improvements we have ever seen. The skid steer loaders are also a great improvement. Unfortunately PJR… they did redesign the whole loader, so it will not be compatible with your style FEL Cant wait to see what is in store from Jinma in the coming years.
Trevor Nystrom
Keno Tractors
Parts Department
541-850-8193
866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
August 11, 2015 at 11:24 am #38025
And also!! There is no exhaust filters or anything like that on the Perkins. No exhaust fluid or changing expensive filters, no operating RPM problems. Just a diesel engine that meets the requirements needed for tier 4. Pretty awesome, as everyone else out there is putting filters and all kinds of emissions crap on their engines that cause the customer headaches. Also we sell mahindra tractors, and they pretty much did the same thing. They designed their own engine that does not need exhaust filters and fluid to run clean. Just a good ole diesel engine, doing what its suppose to without being bogged down.
Trevor Nystrom
Keno Tractors
Parts Department
541-850-8193
866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
August 12, 2015 at 10:34 am #38029
Boo on the FEL compatibility.
-
August 12, 2015 at 10:37 am #38030
I could get you into a new tractor with the new FEL skid steer capabilities! And with a nice new perkins!
Trevor Nystrom
Keno Tractors
Parts Department
541-850-8193
866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
August 12, 2015 at 11:32 am #38031
Strait across for my 2008 with 85 hours?
-
August 12, 2015 at 11:49 am #38032
Welllllll I don't think boss man would go for that one!
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
August 12, 2015 at 2:06 pm #38033
We also have some of the new Jinma with the Perkins coming in, let us know if we can help
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
August 12, 2015 at 5:53 pm #38034
The process of bringing these in started over a year ago, you wouldn't believe what Eric, the owner, had to go through to get the tractors to be compliant with the new strict EPA tier 4 regulations. 8 months ago we bought the first 50 Perkins engines out of the UK and had them shipped to china for testing in the tractors. And here we are today finally being able to touch and feel them, after thousands and thousands of dollars spent with attorneys and EPA representatives, we have all the paperwork and certifications needed to import these engines. Without the right EPA certifications on the engines they will charge $27,000 a day for EVERY engine that is in the country. So we were very sure to cover our butts and do it right, which is also why it took so long. This is why we are the only ones in the country, as of right now, to be able to still sell these tractors. Also, Eric has traveled to India and secured a source to buy Mahindra 35 & 45 Hp engines that are also tier 4 EPA compliant. We just bought the first 2 and they have been shipped to China, soon we will be selling 354s and 454s! Which is a huge milestone for Jinma tractors, as we have not been able to import these models for several years now. Some pretty exciting stuff going on for us right now.
Trevor Nystrom
Keno Tractors
Parts Department
541-850-8193
866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
August 19, 2015 at 1:14 pm #38052
If anyone is looking for a Jinma 254, shuttle shift with a ZL-20 loader, the Perkins Tier IV engine I still have 2- available on a load due in about 4-5 weeks. They won't last long give us a call if interested 979-865-4002
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
September 2, 2015 at 1:43 pm #38075
Hi All,
I have a 2015 Jinma 254 with FEL and Perkins diesel. Thus far, after ~40 hours, the Perkins has been perfect, I don't have a single complaint with the engine. It's strong, starts very quickly and is reliable. (sounds nice, too) I'm on very hilly terrain and it works great, NP. Normal maintenance is easy, filters/drains are easy to access.
I'm very pleased with the tractor, overall. It has exceeded my expectations. Its strong, can do all the things I need to do on the property. I had a minor crush washer issue with a hydraulic line, easily fixed. All the folks @ Keno have been great throughout, very helpful.
Patrick
-
September 2, 2015 at 2:49 pm #38076
Patrick,
Awesome to hear! I'm glad your happy with your tractor. Ive even got that picture you sent us of your tractor in the field set as my desktop background!! I'm sure we will hear from you on down the road sometime. Have a great one!
Trevor Nystrom
Keno Tractors
Parts Department
541-850-8193
866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST
-
-
AuthorPosts
- You must be logged in to reply to this topic.