oil pressure gauge

Forum › Forums › Help Me Find A Part › oil pressure gauge

Viewing 2 reply threads
  • Author
    Posts
    • March 30, 2011 at 12:24 pm #30240
      wood079
      Participant
        • Offline

        I have a Nortrack 254 ( jinma 25 hp) and the oil pressure gauge needle is reading very high pressure. I do not think that there is an engine problem, with the readings so high I figure that some seal somewhere would be blown. I am thinking that I have a bad guage. Does anyone know how I could check to see if it is a gauge and if so where to buy a new one.

        Thanks

        Tony

      • March 30, 2011 at 12:45 pm #31848
        Tinbender
        Participant
          • Offline

          Remove the oil pressure sender and pick up a manual gauge and screw it in, see what you have. You have checked the oil level.?

        • March 31, 2011 at 11:39 am #31859
          davoth
          Participant
            • Offline

            Check on your oil filter bracket there may be an adjusting nut. Mine was way too high after warmup. I adjusted it down into a more reasonable range. Although checking with a manual guage to check would also be a good to check your tractor guage

             

            Dave

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.