- This topic has 2 replies, 3 voices, and was last updated 9 years, 4 months ago by
.
-
Posts
-
-
- Offline
my jinma 284 Power take off shaft isn’t rotating. The engage lever doesn’t seem
to be engaging. I want to repair it myself but don’t know where to start and what
info is available.Any suggestions.
-
Have you made sure that both handles are engaged? There's one below the seat on your left, if your sitting in the tractor. And there's also one on the back of the tractor where you control the speed, 540 or 1000 rpm, make sure that one isn't in neutral. If neither of these fix your problem its probably going to be a clutch replacement. You may get away with just adjusting your clutch. If you need any more help feel free to give me a call.
Trevor Nystrom
Keno Tractors
Parts Department
541-850-8193
866-363-8193
Tyler Nystrom
Keno Tractors
parts@kenotractors.com
866-363-8193
Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST -
Most of the time the shift lump has broken, you have to remove the lift box to access it. Once you have the box off you should be able to identify the problem, let us know if we can help we also have any parts you may need
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
- You must be logged in to reply to this topic.