PTO Hydraulic Pump

This topic has 3 replies, 4 voices, and was last updated 11 years, 7 months ago by lenbo.

Viewing 3 reply threads

Author

Posts
- April 20, 2013 at 8:05 pm #30761
  Kenneth Rassler
  Participant
  - Offline
  Looking for recommendations on a PTO Hydraulic Pump that I can connect to my backhoe.
- April 20, 2013 at 9:48 pm #35973
  RichWaugh
  Participant
  - Offline
  If you're looking for one to run on the 6-spline PTO shaft, I'd recommend a Prince with sufficient capacity to power the 'hoe. you don't say what tractor or hoe, so you'll have to go by the specs on the hoe for how much flow it needs at what pressure and get the appropriately-sized pump.
- April 21, 2013 at 12:45 am #35974
  Bob Rooks
  Participant
  - Offline
  Welcome mr-tech-ed.
  
  You'll have to excuse me, my mind reading skills and X-ray vision aren't quite what they used to be.
  
  What make and model is your tractor, and what make and model is your backhoe? Which PTO do you plan on using? Is your backhoe set up with a reservoir to support an independent hydraulic system?
  
  Provide that info please.
  
  Account deleted.
- May 4, 2013 at 7:56 am #35998
  lenbo
  Participant
  - Offline
  Per what Bob just posted need to know what type of equipment you have.
  
  I modified my LW-7 BH on a Jinma 354 with a Prince pump. I had a complete post on this site several years ago with parts and the modification. If you have equipment like this I'll see if I can find the old post.
  
  LenBo
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.