squealer 84 t |

This topic has 11 replies, 4 voices, and was last updated 9 years, 3 months ago by dogdoc.

Viewing 11 reply threads

Author

Posts
- July 20, 2015 at 5:35 pm #31063
  dogdoc
  Participant
  - Offline
  Picked up a Bush Hog SQ 84 T rotary mower this weekend, very cheap, very used. Needs, I think 2 stump jumpers, both are bent significantly on one end. I am not feeling massive vibration but worry it may eventually stress the 2 gear boxes. Any suggestions on removing these items would be appreciated. The unit is at least 15 years old and I am sure things will not come apart easily.
  
  Thanks
- July 21, 2015 at 4:46 pm #37977
  Bob Rooks
  Participant
  - Offline
  What are you calling “stump jumpers”?
  
  https://
  
  store.germanbliss.com/bush-hog-sq84t-squealer-rotary-cutter-base-assembly-sq84t-parts
  
  Account deleted.
- July 22, 2015 at 7:43 am #37978
  dogdoc
  Participant
  - Offline
  also listed as weldment pan, to which weldment bar and blades are bolted.
- July 22, 2015 at 7:46 am #37979
  DavidPrivett
  Participant
  - Offline
  I would try heat and big hammers once you get them off . the stump jumper does not have to be perfect ,it just has to lift the mower over , well stumps . This will take some effort I have not worked one a mower that large but I can imagine those plates are thick ,but if it is bush hog they are pretty good about parts on older machines if you have to buy stuff.
- July 22, 2015 at 9:46 am #37980
  Bob Rooks
  Participant
  - Offline
  It appears that the blade pan weldment is held in place by the blade bolts and the main shaft blade nut and washer. Removal seems pretty straightforward, but I would figure on replacing the blade bolts with kits.
  
  Account deleted.
- July 23, 2015 at 3:37 pm #37983
  dogdoc
  Participant
  - Offline
  something tells me it wont be as simple as removing a few bolts, but I will post some follow up
- July 23, 2015 at 7:01 pm #37984
  DavidPrivett
  Participant
  - Offline
  I have a three quarter torque wrench that is about 4 ft long goes to 600 ft. lbs those make things move or break. I has been a back saver.
- July 25, 2015 at 1:12 am #37988
  Bob Rooks
  Participant
  - Offline
  I have a 1″ drive impact you can borrow.
  
  Account deleted.
- July 25, 2015 at 9:13 am #37991
  Tinbender
  Participant
  - Offline
  I have a 3/4″ CP impact I bought from a concrete pumping company that was closing due to retirement. One of the best 50 bucks I ever spent. It was either that or the other 50 I gave them for a set of Snap On open end wrenches going from 7mm to 32mm
- July 25, 2015 at 1:19 pm #37993
  dogdoc
  Participant
  - Offline
  I have a 1/2 in drive breaker bar and a piece of black pipe, hope I am not under gunned
- July 25, 2015 at 7:13 pm #37995
  DavidPrivett
  Participant
  - Offline
  I have know people who have had to use a cutting torch, Argi Supply Co. sent me a email ad. and they had stump jumpers for a couple other machines just less than 100 bucks ea. so fix what you can,good luck
- August 17, 2015 at 4:08 pm #38042
  dogdoc
  Participant
  - Offline
  Got the squealer apart and the stump jumpers and blades were the easy part. Other stuff was rusted and bent creating lots of headaches. Need 4 new blades but at 250 a pop trying to salvage one of the jumpers. Fired up the knife making forge, heated and pounded till it was somewhat symmetrical. We'll see.
Author

Posts