transfer case will not lock in gear

This topic has 1 reply, 2 voices, and was last updated 10 years, 7 months ago by Preson Reiva.

Viewing 1 reply thread

Author

Posts
- March 11, 2014 at 8:11 am #30870
  Charles Leonard
  Participant
  - Offline
  my 1991 dragon 254 will not lock in gear. I have taken the 4 bolts out that hold the universal joint to the transfer case and have put the four wheel shift in lock and the low and high shift in gear and the main transmission in gear and the transfer case will turn freely does not lock at all. any thoughts on how to fix this problem. thanks Wayne 1971
- March 11, 2014 at 6:38 pm #36817
  Preson Reiva
  Participant
  - Offline
  Wayne, So your saying even after disconnecting the drive line to the front you got your fwd locked in and your yoke still doesn't turn? If thats the case you may have a broken Input/out shaft?
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.