- This topic has 6 replies, 4 voices, and was last updated 12 years, 10 months ago by
.
-
Posts
-
-
Jinma 204. Had a coolant leak coming from water pump. After removing radiator and taking fan and pulley off, I discovered leak is coming from a 1/8 weep hole in bottom of water pump. Ordered a new pump and the weep hole and gasket doesn't match up with the old one. Anyone know why my coolant is coming out this hole? Can I just plug the hole? Any hepl is appreciated. Mack
-
Hi Mack,
The weep (tattletale) hole serves two purposes.
1) It tells you when the seal has failed.
2) I provides an escape for the coolant so it doesn't force it's way into the bearing and ruin it, and possibly take out the radiator, alternator, etc.
What do you mean the weep hole and gasket “don't match up with the old one”? Is the bolt pattern different? Different hub pilot size?
Account deleted.
-
Which engine do you have ? The Yangdong and the Laidong water pump look the same other than a small hole at the top ,the bolt pattern and everything else is the same,where did you get the parts ?
The pump or gasket must be wrong, send me a pic of the pump and the gasket and I can confirm it for you, along with the name of your engine
tommy@affordabletractorsalesco.com
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
-
If it's the correct pump ,It must be defective.I still would like to see a pic of the new pump,I have just seen too many times the Yangdong pump installed on the Laidong engine and has a leak,both of these pumps have the same bolt patteren and use the same hoses.If you are confident that the pump is correct,it is a defect.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
-
-
-
- You must be logged in to reply to this topic.