- This topic has 3 replies, 4 voices, and was last updated 8 years, 6 months ago by
.
-
Posts
-
-
Hi there, I haven’t been here in many moons but I love the new site! I have I believe a 1999 Jinma 254 with a Koyker loader. The loader is run off of a separate pump driven off the front of the crank. My problem is that when the tractor gets warm the 3-point wont lift an implement. I don’t notice the loader getting weak, just the 3-point. The fluid is not that old and the filter is clean. Any help would be greatly appreciated.
Thanks, Bill
-
I would say that if your three point hydros work when oil is cold and doesn’t when it gets to a normal working temp. that you have a pressure problem in the three point lift system or something is bypassing. I am not familiar with that lift but the old fords there are adjustments that can be made to the pump and associated springs .
-
-
Sounds like you either your pump for the 3- point is getting weak, or your O-rings are bypassing on the 3- point piston.Not sure how your steering is plumbed ? Which pump . Most of the front mounted pumps only took care of the steering, the other pump took care of the loader and the 3- point.I would have to see it to confirm
Tommy
Affordable Tractor Sales Co.
“Your Jinma Parts Superstore”
http://www.affordabletractorsalesco.com
-
- You must be logged in to reply to this topic.