- This topic has 0 replies, 1 voice, and was last updated 5 years, 5 months ago by
.
-
Posts
-
-
2006 Jinma 284 with Electronic style instrument cluster (rectangular)
After getting all the bulbs replaced with new LED lamps I noticed that when I turn on the headlights there are two indicators that light up in the instrument panel.
On the right hand side the top lamp is for the Running/Instrument lights. It works properly
The next one down is a lamp with the light coming out at a downward angle. I would think that would be for the back work light.
The third one down is a lamp with the light coming straight out. I would think that is for the headlights.
The second and third indicators could be for high and low beam, but on this tractor all the headlight bulbs come on with the headlight switch.
It has been too many years for me to remember if both indicators came on with the headlights or if one was for the rear work light.
Can anyone tell me if these two are supposed to come on together or do I have a short somewhere?
Thanks in advance.
-
- You must be logged in to reply to this topic.