- This topic has 4 replies, 2 voices, and was last updated 5 years, 5 months ago by
.
-
Posts
-
-
Greetings. I’ve never had a need to seriously (for me) get into the workings of my fiberglass-bodied Yuchai dozer from about ten years ago, but the backhoe quit hoe-ing (low pressure) and I took off the pump for repair, which it didn’t need, and am now going to go about checking the return valve pressure setting.
I don’t know where it even is, demonstrating my (1)personal professionalism lack…
Is there available, yet, a mtc. manual?? :scratch:
==================
(I also pressure washed the charging system wires on the engine bulkhead off, and now start the engine with a jumper-wire set up which works just fine, but further illustrates (1) above…) 🙁
=========================
??”Members Currently Active: 0″ ?? You mean I’m dead? Writing this is an illusion and hitting “send” won’t do nuffin?? :scratch:
Here goes “nuffin” SUBMIT
-
-
-
Hey Bob, thanks to you I have a manual, as well as ones I’ve obtained from some other sources,
but since I got my dozer second hand, I supposed that someone who was a “first owner” may have received an actual manual.I could post the one you provided to me, but wouldn’t without your permission.
It should be noted that my initial post from 2 years ago, above, was just accessed again very recently,
and I was surprised that there was no response. So, I responded to myself, and posted a document
which has value, in accord with the forum’s intent.Is there anything here that is a violation of sensibilities? :scratch:
-
Not that I’m aware of David.
Any manuals I supplied are nothing special and widely available from multiple sources, and you can purchase new printed parts and owner’s manuals from Northern Tool, Circle-G, and others. And I will reiterate: There are no shop/repair manuals for these Chinese tractors.
Account deleted.
-
- You must be logged in to reply to this topic.