GNXGuy

Forum Replies Created

Viewing 7 posts - 11 through 17 (of 17 total)
1 2
  • Author
    Posts
  • February 9, 2018 at 8:37 pm in reply to: No start—-no response from starter or lights #47512
    GNXGuy
    Participant
      • Offline

      Thank you. What terminals would I jump. Depending on whether I’ll try to take a picture of the actual starter maybe you can direct me to which terminals I should try jumping

      Thank you so much

      Joe

      October 3, 2016 at 6:01 pm in reply to: Hydraulic Oil recomendation for Foton 704 #46442
      GNXGuy
      Participant
        • Offline

        Thanks guys.

        I’ll have to get a picture of the Diesel engin next time I’m at the farm in a few weeks.

        Should we stay away from the “Universal Hydraulic oil” such as Universal oil

        What about this 303 Oil 303 oil

        Thanks again

        October 7, 2014 at 7:08 am in reply to: Foton 704 electrical / alternator / voltag regulator problem #37274
        GNXGuy
        Participant
          • Offline

          There is only one wire coming out of the pigtail connection, so how could there possibly be an external voltage regulator.  An external voltage regulator requires 2 or more inputs.

          ????

           

          Joe

          October 5, 2014 at 12:29 pm in reply to: Foton 704 electrical / alternator / voltag regulator problem #37269
          GNXGuy
          Participant
            • Offline

            I sent Tommy all the photos.

             

            I did a final test with tractor off and battery read 12.1 V   then started tractor and it checked while running an I was at 11.8v

             

            Thanks guys

             

            Joe

            October 4, 2014 at 8:10 pm in reply to: Foton 704 electrical / alternator / voltag regulator problem #37264
            GNXGuy
            Participant
              • Offline

              Well, not sure I have faith in the accuracy of the manual but it says the Alternator is rated at 1000 Watts / 14v, which would make it about 71 amps?

              Did I do the math correctly?

              The parts manual that came with the tractor clearly shows an external voltage regulator located under the dash next to all the relays.  There is nothing to be found other than the relays on my 704.

              I'll pull the alternator tomorrow and take a closer look.

               

              Joe 

              October 4, 2014 at 3:56 pm in reply to: Foton 704 electrical / alternator / voltag regulator problem #37262
              GNXGuy
              Participant
                • Offline

                Yup, checked and cleaned all connections.

                Was that a typo  14 or 15 amps on the original Alternator?

                 

                Joe

                October 4, 2014 at 2:00 pm in reply to: Foton 704 electrical / alternator / voltag regulator problem #37259
                GNXGuy
                Participant
                  • Offline

                  Thank you Bob,

                   

                  When running and measured at the battery, I see 12.2v.

                  I'll take a photo of the alternator and post here a bit later.

                  If its integrated, do I need to purchase a new alternator?

                   

                  Thanks again

                   

                  Joe

                • Author
                  Posts
                Viewing 7 posts - 11 through 17 (of 17 total)
                1 2