Affordable

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 449 total)
  • Author
    Posts
  • in reply to: tractor has no power when turning #48794
    Affordable
    Participant
      • Offline

      Sounds like the steering cylinder is bypassing internally, need to possibly rebuild the steering cylinder

      Tommy
      Affordable tractor sales
      979 865 4002

      in reply to: Max running temp Jinma 284? #48786
      Affordable
      Participant
        • Offline

        Well, not sure how this got all turned around Bob,we don’t think these tractors need to boil over ( That was never in the conversation OP had with my Son ), we tried to explain they do not have a overflow tank, and that they tractors needed to have a operational Thermostat to work properly?? This customers tractor may not have had a thermostat and we were trying to explain why it needed one ? Not sure how this got turned around like it was how it worked

        The most common overheating problem on the Chinese tractors is the Radiator is not getting enough flow through it due to being clogged up and dirty, a bad or non working thermostat,no thermostat,bad radiator cap, ect.

        Tommy
        Affordable Tractor Sales
        “Your Jinma Parts Superstore”

        in reply to: Jinma 284 Y385 gauge & filter conversions #48342
        Affordable
        Participant
          • Offline

          We are closed until Monday,however the tach needle will not reset until it gets 12 volt power,check your wiring.when you turn the key switch on yo give it power it will drop to zero.They all do this

          Tommy
          Affordable Tractor Sales

          in reply to: Jinma 284 Y385 gauge & filter conversions #48218
          Affordable
          Participant
            • Offline

            We have almost all of the parts for these tractors let us know if we can help

            Tommy
            Affordable Tractor Sales
            “Your Jinma Parts Superstore”
            http://www.affordabletractorsalesco.com
            979-865-4002

            in reply to: Jinma key switch #47459
            Affordable
            Participant
              • Offline

              ON the JInma Key switch first stop to the right is accessories, if you will hold the key in the spring loaded position between accessory and start that powers the glow plugs, you should see a large amp draw when you first do it, hold it in that position for 15 seconds if the glow plugs are working,it should start a lot easier and faster

              Tommy
              Affordable Tractor Sales
              “Your Jinma Parts Superstore”
              http://www.affordabletractorsalesco.com
              979-865-4002

              in reply to: Parts Dealers #47448
              Affordable
              Participant
                • Offline

                We have thousands of parts in stock, he did not want to hear that you cannot turn up a hydraulic pump, we told him he could replace with a larger GPM.Also we did not give him cross references for filters,we have all the replacement chinese filters in stock, since there are 4- different JX0707 filters we wanted more info.

                We sell and STOCK more Jinma Parts than anyone else in the USA, we are here to help

                Tommy
                Affordable Tractor Sales
                “Your Jinma Parts Superstore”
                http://www.affordabletractorsalesco.com

                in reply to: Fuel line #47105
                Affordable
                Participant
                  • Offline

                  We should have what you need give us a call tomorrow 979-865-4002

                  Tommy
                  Affordable Tractor Sales
                  “Your Jinma Parts Superstore”
                  http://www.affordabletactorsalescp.com

                  in reply to: FEL up and down very slow on Jinma 454 #46988
                  Affordable
                  Participant
                    • Offline

                    Sounds like either one or both of the lift cylinders are leaking by internally or something going on with the valve, I would bet on its one of the cylinders,if its a Jinma ZL-40 loader we should have rebuild kits for the cylinders, we also stock Koyker rebuild kits from 1-3/4″-2-1/2″ give us a call 979-865-4002
                    Tommy
                    Affordable Tractor Sales
                    “Your Jinma Parts Superstore”
                    http://www.affordabletractorsalesco.com

                    in reply to: TY395I Fuel Injector Pump #46871
                    Affordable
                    Participant
                      • Offline

                      We should have the correct fuel injector pump in stock, give us a call, best to send a pic for confirmation also

                      Tommy
                      Affordable Tractor Sales
                      “Your Jinma Parts Superstore”
                      http://www.affordabletractorsalesco.com

                      in reply to: 2005 Jinma 284 LE Tractor #46804
                      Affordable
                      Participant
                        • Offline

                        We have just the swivel mount that the seat bolts onto,our we have new seats too

                        Tommy
                        Affordable Tractor Sales
                        “Your Jinma Parts Superstore”
                        http://www.affordabletractorsalesco.com

                      Viewing 10 posts - 1 through 10 (of 449 total)