Forum Replies Created
-
Posts
-
I have sold many of those clutchs, but have never personally adjusted one myself.I'm sure the main would be the same as the 3- finger, we adjust the fingers 1/8″ from the throw out bearing, since the other 3- fingers on the 6- finger are lower, you would need to figure out where the main clutch release's at, then see where the clutch pedal is at,the clutch pedal should be at the half way mark when the main clutch release's then you can figure out the PTO Adjustment
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
You got it ! Single acting cylinder only, if you want a true rear remote you need to add a valve, pressure and return line
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Ronald at Ranch hand has a kit for you to add a valve. ect., give him a call 757-650-9124. You cannot use the quick connects at the rear of the tractor for what you are wanting to do.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
What manuals do you have ? There is a Parts manual, Operations manual, and a engine manual ( you must know which engine you have, we have them all. If you are looking for a service manual, they do not exist for the Chinese tractors
Give us a call if we can help you, 979-865-4002
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
That is correct, good Pic Tinbender
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
The hydraulic fill is behind the seat for the 3- point lift and the loader, you prob. have a separate Pump and res. for the power steering. What type of Hydraulic oil are you using ? We recommend AW032 Wt. oil, Universal Hydraulic oil is 46 wt I think. SO the thinner oil will work faster in the colder climates
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Yes you have a Laidong KM385 Engine
Tommy
Affordable Tractor Sales Co.
“Your Jinma Parts Superstore”
The large gear will turn as you roll the tractor backwards ,as you are pushing the spline sleeve off it will go by it then just keep pressure on it as you roll the tractor back
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Make sure you are getting hydraulic fluid to the lift valve, if you are there is a pressure relief inside the lift box that may be stuck open
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I agree with Bob, the hard line from the pump to the injector has ferrules made onto the hard line
We do have the replacement hard lines, give us a call tomorrow 979-865-4002 we will get you fixed up
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
