Forum Replies Created
-
Posts
-
Thanks for the order, glad we could help
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
We have the manuals, what engine does it have ? Need name and model number
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Wow, even though you marked the gear you have NO clue as to what position the injector pump was in in relation to the rest of your engine.
You can start with finding your timing marks on the crankshaft,the timing on the Y385 engine is 16 degree BTC. ,once you locate the timing mark you will have to see what position your injector pump is at, you will have to remove the gear off the front and get it in time with the crankshaft.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I would not take a chance on welding the cast iron oil sump up, if it leaks and you run out of oil you just cost yourself a engine.If you have the 1- piece sump, you will have to split the tractor to replace it. I would replace it with the newer 2- piece sump with a bottom cover, that way next time you need access you don't have to split the tractor
We have all the parts you may need, splitting the tractor may be more than you want to do.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I have seen 21 spline PTO shafts before, but we are talking Chinese Tractors 101, and they have 6- spline shafts, 540/1000 speed selectors
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Bob thats not true either, all the Jinma 254/284 tractors have a 6 spline PTO with 540/1000 Speeds
The Jinma 354 tractors have the 540/720 Speeds
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
The seal is on the end where the shaft comes out of the pump, Let us know if we can help you with the new pump or a rebuild kit for yours
The pump has a total of 4- bolts, only 2- of those bolts hold the pump on the tractor the other 2- hold the pump together
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
We should have rear R-1 Ag tires and rims in stock, I will make you a special deal on.Let me see what I have and I will let you know, I responded to your e-mail also
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
If your pressure gauge is in between the Hydraulic pump outlet and the inlet to the loader valve, your outlet pressure should be around 2,300PSI, the relief valve on the loader may be set at a lower pressure but this is the pressure you should have on your gauge.
If your pump is only producing 1300 PSI at its outlet, everything else will have that same pressure or less
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
You need to start with what model tractor you have ? This will help with how to try and resolve your problem
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
