Forum Replies Created
-
Posts
-
Mahindra bought the old Lenar factory, and changed the engine up a little in your model tractor.I don't know of anyone selling Lenar parts in the USA any more.I would get the engine serial and model number and start searching from there.I sell complete bolt in engines for the Jinma tractors and they are around $ 3K,but they will not fit your tractor
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
No one is going to have or sell you parts for the fuel injector pump,you will have to replace the pump or take it to a fuel injection shop to get rebuilt
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Call Chip at Artrac Tractor in Ar. ,he has the parts and can help you with the DF tractors
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
If they are the S shaped hoses , those are on the return, no pressure on them
Tommy
Affordable Tractor Sales Co
“Your Jinma Parts Superstore”
http://www.affordabletractorsalesco.com
We have the parts books too, Prob. a good idea to have a set.It will have both the Brake shoe and brake disc. diagram, plus all the part numbers.The manuals are cheap $ 15.00 each , we have a set including the engine parts but we need to know which engine you have first.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
They are pretty simple to change, you can see a breakdown in your parts book, There are no service manuals for these tractors.Depending on year model, some have brake shoes, some have discs.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Rent a electric Bosch Jackhammer and break 2- slots for the new conduit to run thru.How deep is the bix,? From the Pic it looks like a 48″ x 48″ box ?
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
We have had engines do that before and one of the ( piston discs was stuck or broken inside the injector pump. These injector pumps are calibrated so do not try to take it apart, you can have a fuel injection service rebuild the pump or just replace it.I have found that a new Injector pump is less cost than rebuilding your existing pump
I have the new pumps if you have to get one
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
The bolts in the gear are not slotted on the TY395I fuel injection pump gear
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
When you start out by saying you are not a mechanic, and you are rebuilding a engine you are not going to get alot of help here.Rebuilding a engine is not for a amature ? You must line up the crankshaft, cam, fuel injection pump,ect.If you are off on any one of these you will cause damage,
Do you have the parts books, operation manuals ? It will tell you where the timing marks are, there also on the flywheel.A mark on the balancer is 2 degrees, NOT TEETH.
I would not offer any advise on a engine rebuild without seeing it myself,and I think others feel the same way.To much can happen to cause damage
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
