Forum Replies Created
-
Posts
-
If it's on the front of the engine,my guess would be the water pump or a hose.Take a good look at the bottom of the water pump right behind the fan
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Contact Ronald @ Ranch Hand Supply he should be able to help you
757-650-9124
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I forwarded the Pics you sent me to the Shop, Jerry should be contacting you.Hopefully we have one that will work.If not you can try FarmBoys Tractors, they also sell Rhino parts
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I do agree with the above and will add the following, most of the Jinma tractors that were imported into the USA and assemblied here,did not have the clutchs adjusted correctly from the start,which can cause premature failure.We have assembled hundreds of Jinma Tractors and I would have to say less than 10 % of them had clutchs that were adujsted correctly from the factory. Most people did not know to adjust them because they seemed to work OK ( including us in the 1st year) After replacing several clutchs under warranty, we tried to figure out why. After we started adjusting them during assembly the we had no warranty replacement clutchs and had customers coming in with 800,900 hours with no clutch problems.
Make sure your mechanic knows how to adjust a two-stage clutch ! ,If we can help you with any parts let us know
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Give us a call 979-865-4002, We should be able to help you
Tommy
Affordable Tractor Sales Co
“Your Jinma Parts Superstore”
Sounds like the bearing is out , take the 4- bolts off where the column bolts to the power steering machine there is (was) a bearing on the bottom
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Did you get it out
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
They are 1/2″ NPT thread
Tommy
Affordable Tractor Sales Co.
“Your Jinma Parts Superstore”
We have them, give us a call 979-865-4002
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
That rear bearing is whats giving you the grief, you can also try to get a screw driver in between the 2-shafts to get it started moving, once it starts it will come out pretty easy,we have also welded a ring on the back of the shaft to get a puller on.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
