Forum Replies Created
-
Posts
-
Bob Rooks said:
Tommy@Affordable wrote:
“If you are fortunate enough to get a good chinese backhoe, and you have a hydraulic cylinder leak good luck on finding the correct kits to rebuild it.”
That's not true. I bought at least two kits from you and three from Phillip at Circle-G before I got the correct kit. Believe it or not, they do exist.
Bob, if you were happy why don't you still have yours ??Why did you switch to a Korean backhoe ? I have ordered rebuild kits 8-10 times, I have at least 250 kits that do not fit any of the LW-06,07 or the HW06,07 backhoes.
I'm not saying there are not some happy owners of these backhoes, because there is. However most have spent additional money for either a Prince pump upgrade, fittings or JIC adaptors,Valve replacements,hose upgrades,ect.If you put that additional money spend on top of the original cost you are alot closer to the cost of Korean made backhoe, without having to work on it.
I bought at least two kits from you and three from Phillip at Circle-G before I got the correct kit. Believe it or not, they do exist.
Before you got the right kit ?, so your saying you had to go thru 5 kits to get the correct one. ? Well I guess the do exist at some point.
The point is that I personally have seen and talked to alot of customers that purchased these backhoes,almost all have said it was less expensive but would not do it again.
Thats why this forum is here for owners to talk about there equipment, and as a dealer I'm going to express my opinon about them too,
Each owner or potential owners has to make there own decision on if to purchase or not,but it's also the dealers job to advise them on problems,parts problems,operation problems,ect. I rest my case
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I have been selling Jinma Tractors for years now, In 2002 I ordered a container of these backhoes, it was one of the biggest nightmares I ever had, in order to keep the customers happy I stripped 3 or 4 units for parts, and had alot of problems with the others,I said I would never buy another one and haven't.While there are bargains on Chinese equipment, I think you will find that you will find 20-unhappy Chinese backhoe owners compared to a Happy one.By the time you do all the mods to them to upgrade them you could have bought a quality Korean made backhoe that are very powerfull and smooth as glass to operate.
If you are fortunate enough to get a good chinese backhoe, and you have a hydraulic cylinder leak good luck on finding the correct kits to rebuild it.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
We have the factory manuals as stated above, thanks Rich. Sad news is they are not free, they are the best thing avaliable
Tommy
Affordable Tractor Sales
” Your Jinma Parts Superstore”
Jeff if you will send me a e-mail we will look up some dealers or service providers in your area, tommy@affordabletractorsalesco.com
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Are you talking about this plate ? See link below
Tommy
Affordable Tractor sales
“Your Jinma Parts Superstore”
Bob,I don't think that place is in buisness any longer. There is 1-dealer in Ca. I think.
YTO looks like a nice tractor,I can get parts we just don't stock many because the smal amount of YTO tractors that are in the USA.I know Koyker makes loader mounting kits for all sizes of there line.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Do you have a pic of your panel?? On most tractors you have a tach sender at the flywheel,but since you are losing both it could be a bad power or ground,or a bad panel
Tommy
Affordable Tractor Sales
“Your Jinma PartsSuperstore”
Yes I have the primers seperate,there are 2-different types 1- with primer on the right,1-on the left looking at the pump.Call the shop 979-865-4002 and we can get you fixed up
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
CHeck the pivot point under the tractor it must have flipped over, I have not seen one do that but thats the only thing I can think that would cause that
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
You have to overcome the spring pressure which cost you a few lbs, most backflows it's 2-3psi. Bob Rooks, not again !!!!! it's not a pressure regulating valve .
Tommy
Affordable Tractor Sales Co
“Your Jinma Parts Superstore”
