Forum Replies Created
-
Posts
-
I'm a master plumber by trade, I would get a 1-1/4″ valve and fittings,it's volume and pressure,the 1-1/4″ valve will give you the volume you have now without the valve, but the springs inside the backflow preventer will reduce your pressure by about 3-5 lbs depending on type of backflow valve
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Glad we can help!!!!
I have a screw on filter kit you you can install on the return line to the pump,it comes with a filter head, screw on filter, fittings, compression fittings for your hard line.All you have to do is cut out about a 4″ section of the hard line to install
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
We have the manuals, hoses, or just about any other part you may need for this tractor, we ship the same day on orders received by 1pm, all others will ship the next day
We also have a online parts store you can shop 24 /7 from your easy chair
Tommy
Affordable Tractor Sales Co
“Your Jinma Parts Superstore”
Spray WD40 where the operation handle and shaft come out of the side of the transmission housing,work it up and down it should free right up.
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Send me the pics tommy@affordabletractorsalesco.com
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Give me the part numbers I know the 69T gear, but I need the other one (13T)
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
The Claw is held in place by the Fork 131, the claw slides on the driving shaft that is what locks the differential lock in .There are 2- snap rings and a nut, It has to be disassemblied to be removed
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
I will have to look in the book/manual tommorro, should be a nut or a snap ring
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
Thats Funny
Don't shed a tear, Affordable is here, to help you fix the gear,
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
The 69T gear lost a tooth when the Spline sleeve slide back into it, I would check the Spline sleeve for damage also.You have to remove the Rear housings then you can disassemble and get the gear off,looks like you have a job ahead of you
Tommy
Affordable Tractor Sales
“Your Jinma Parts Superstore”
