Forum Replies Created
-
Posts
-
Thanks a bunch for all of your help, but this hydraulic thing is going to have to wait because it has interfere with my fishing and golfing. Would like for everyone that posted to know that I learned a lot from each post.
Thanks again,
Billy
P.S. I haven't give up . Will eventually find the problem,just not right now.
Tommy at Affordable, I've have pulled the the cyclinder out and replaced the o-ring and wafer. Boy that was one heck of a job. On this one had to jack up the reservour and take 4 bolts loose to pull the cyclinder out . The old ones looked okay but I went ahead and replace them anyway. The piston also looked okay. I have left the lift cover off and watch to see what happens. Its kind of hard to see whats going with the reservour full of oil
Maybe you can tell me what the adustment is on the left of seat . It's goes to the main value in the reservour
Springvalley, I have fool around with this control a lot. Looking at the manual, its call the flow control valve. Only thing I see that it does is adust how fast the TPH falls.If I screw it all the way in , the TPH will not fall at all. If I screw it out, falls way to fast. I've got it adjusted now where it falls normally.
Tinbender, Started having trouble after the warranty was out. Cost me $500.00 the first time and it last about 8 months . The next time it cost me another $500.00 and it last awhile ,so this is when I decided to tried and fix myself. Can't afford another $500.00. This is the reason I'm going to leave it like it is. Can still worked the TPH by raising and lowering the FEL.
Tinbender, It does have a filter on the inside of the sump and know it doesn't have a external filter. I have removed this filter and cleaned it up , Didn't replace because it looked okay. I have checked everything that I know . I 'm going to use the tractor the way it is. Will just have to raise and lower the the bucket on the FEL to raise the TPH. Thought i could fix it, but I going to have to give up. Thanks for your reply
P.S If I do or every find out what the problem. I will post so others can fix if they have the same problem. Don't like to give up but this problem has defeated me. Thanks to all thats tried to help!
Billy
Ranch Hand, can you tell me what the pressure should read on a pressure guage if the pump is defective.
If the fel and power steering is working okay , since both of these are working off the same hydraulic pump ,I would assume the pump is good. Could be wrong. What do you think?
