Forum Replies Created
-
Posts
-
Is there any body out there now that knows anything about a Kama TS254c Tractor. I really do have some questions. Can not seem to get any body to respond
BENNIE – POST YOUR QUESTIONS. I don’t think anyone will respond to no questions asked.
Account deleted.
Cummins has always used manifold cold starting aids, even on their larger engines. At one time they even had an ether injector into the manifold. I remember on the old Fairbanks-Morse direct reversible marine engines we took off a manifold cover and literally built a fire in there with oily paper, closed it up and then started the engine. Why other diesels don’t use a manifold cold starting aid is a question for the design engineers, but I’ll speculate that “We’ve always done it that way.” I have a neighbor that has a Nissan/Cummins truck. Very nice, quiet too. He loves it. Here’s a short read on glow plugs.
http://www.topcustomproduct.com/steel-versus-ceramic-glow-plugs/
Account deleted.
Good going Ray. I dread having to do that on my 6.4 Powerstoke. I can’t even see the engine, but I know it’s in there somewhere.
Account deleted.
Sounds like a bad pigtail, or just plain bad pickup that could be temperature sensitive.
Account deleted.
I have read where the fork could come loose on the rail. I think it’s just a set screw.
Account deleted.
Every time you do something like this you learn a little trick or two that makes it go easier and quicker, and before you know it you’re good enough to open up a tractor repair shop. B-)
Account deleted.
You need to be able to slightly rotate the transmission input shaft while applying some slight forward pressure. You don’t want to loosen the pressure plate because that might let the clutch disc fall and then you would have a problem aligning the pilot into the flywheel. You may be able to get away without pulling the engine, but if not what you will need then is a clutch aligning tool. The clutch housing can only be removed after the flywheel is removed.
A clutch alignment tool is available here:
Account deleted.
That is the only way they can get ten pounds of crap into a five pound bag.
For my F350 it’s $1,000 to R&R the body.
Account deleted.
Google “tractor cab”
Here’s one example.
https://www.covermytractor.com/Tractor_Cabs_and_Cab_Enclosures_s/4.htm
Or contact these people.
http://www.sundownequipment.com/new-equipment/foton-tractors.aspx
Account deleted.
