Forum Replies Created
-
Posts
-
Most of the time when the PS works as you described on the Jinma 254's it is a torn seal in the Power steering cylinder itself allowing the fluid to by pass causing you to make many turns of the steering wheel before the wheels will turn. You may want to pull the shaft out of the PS cylinder and check them as well.
Ben
On the 4wd not working, most of the time it is the circlip broken or slipped out of groove on shaft, we had one in the shop today with same problem. Circlip had slipped out of groove on shaft allowing the 6 steel balls to come out of coupling. You will know when you drop the cover under tractor, look for steel balls to roll out! We have every part in stock for your tractor if you need something.
Ben
Rick we carry all the parts for that tractor should you need anything in the future.
Ben
We have the covers in stock
Ben
http://www.circlegtractorparts.com
Circle G Tractor Sales, Inc.
662-252-5272
There's a nice engine rebuild manual for the tractor on ebay for $32.99
Ben
That is probably the only one you have, we flush our systems with diesel, some use kerosine. We will have all the filters in stock and any other part you may need for your tractor in stock!
Ben
http://www.circlegtractorparts.com
662-252-5272
We have the complete blocks in stock or we have the bare blocks in stock also with all the parts to build if you go that way. We have every part for your tractor in stock. http://www.circlegtractorparts.com
Ben
Circle G Tractor Sales, Inc.
662-252-5272
Yes, RD we do have the complete Engine with everything you mentioned should you need it just give us a call. 662-252-5272
Ben
Circle G Tractor Sales, Inc.
Chuck, we probably have that solinoid, go to http://www.circlegtractorparts.com and click on starter-solinoid on right side, it will be close to the bottom of page. See if you see yours there.
Ben
Circle G Tractor Sales, Inc.
