circleg

Forum Replies Created

Viewing 10 posts - 11 through 20 (of 66 total)
  • Author
    Posts
  • in reply to: Glow plugs #35386
    circleg
    Participant
      • Offline

      Go buy you a good toggle switch and run you a wire from hotpost on battery to one contact on toggle switch, other contact on toggle run to the bus bar that connects all glowplugs, hold toggle switch to on position for about 15 to 20 seconds, start tractor.

       

      Ben

      Circle G Tractors

      http://www.circlegtractorparts.com

      in reply to: The Canyon Assault with Guilin Dozer #35385
      circleg
      Participant
        • Offline

        Those were some really great pics!

         

        Ben

        Circle G Tractors

        http://www.circlegtractorparts.com

        in reply to: Engine knocking #35384
        circleg
        Participant
          • Offline

          Well, if you need that short block, we have them in stock.

          Merry Christmas

           

          Ben

          Circle G Tractor Sales, Inc.

          http://www.circlegtractorparts.com

          in reply to: Hydraulic plug/dipstick combo #35204
          circleg
          Participant
            • Offline

            Can order that plug online at http://www.circlegtractorparts.com or give us a call at 662-252-5272.

            Ben

            Circle G Tractor Sales, Inc.

            in reply to: oil filter 426e #35203
            circleg
            Participant
              • Offline

              Greg, we stock all of the Chinese filters, I believe that takes a 85100C filter, go the our online store http://www.circlegtractorparts.com and click on filters or type in the search box. If you will mike the filter or mail it to use we will be glad to match one up for you.

               

              Ben

              Circle G Tractor Sales, Inc.

              662-252-5272

              in reply to: Jinma 284 Thermastat #35202
              circleg
              Participant
                • Offline

                Willie, we also have those thermostates and every part to that unit in stock. Give us a call if we can help 662-252-5272 or order online at http://www.circlegtractorparts.com

                Ben

                Parts Manager

                Circle G Tractor Sales, Inc.

                in reply to: Jimna JW 03 aluminum pump #35201
                circleg
                Participant
                  • Offline

                  Those backhoes can be a real stickler, I have had several over the years that have completely stopped working and usually we could take apart the pressure relief valve, blow out reinstall and they would start working again, had that happen on several occassions. We stock most of the parts for that backhoe if you need anything in the future.

                  Ben

                  Circle G Tractor Sales, Inc.

                  http://www.circlegtractorparts.com

                  662-252-5272

                  in reply to: Electrical Problem #35200
                  circleg
                  Participant
                    • Offline

                    Willie, we had the same problem on a new 454 we got in this year and found it to be the voltage regulator as well. Hope that gets you going. Give us a call if we can be of help.

                    Ben

                    Circle G Tractor Sales, Inc

                    http://www.circlegtractorparts.com

                    662-252-5272

                    in reply to: 354 Jinma #35199
                    circleg
                    Participant
                      • Offline

                      Start with the fuel filter, if that doesn't do it check filter in tank on end of fuel bowl, there is also a filter in the top of bowl. If still not running correctly check filter at end of hose running to the hand pump at banjo bolt end. Sometimes that fuel hose from the shut off under tank to the hand pump will collapse on the inside when engine warms up, check it. We have any part for your tractor in stock should you need something. Give us a call if we can help.

                      Ben, Parts manager

                      Circle G Tractor Sales, Inc.

                      http://www.circlegtractorparts.com

                      662-252-5272

                      in reply to: Jinma 284 Injector Pump/Bell Housing #35143
                      circleg
                      Participant
                        • Offline

                        We have both the injection pump and the bellhousing if you need them in stock, let us know if we can help. http://www.circlegtractorparts.com

                        Ben

                        Circle G Tractor Sales, Inc.

                        662-252-5272

                      Viewing 10 posts - 11 through 20 (of 66 total)