Forum Replies Created
-
Posts
-
We have seen this many times, I bet it is a injector with some trash, you may run it and it may clear up but keep an eye on the water temp, we have plenty of injectors in stock for all the 385 models if you need one.
Ben
Circle G Tractor Sales, Inc.
http://www.circlegtractorparts.com
662-252-5272
Some of those had the shoe and others had the disc. Better check before you order, we have both in stock as well as the manuals at http://www.circlegtractorparts.com or give us a call at 662-252-5272.
Thanks
Ben
Circle G Tractor Sales, Inc.
662-252-5272
Andy, we will have a injection pump to fit your tractor, go to the online store http://www.circlegtractorparts.com or give us a call.
Ben
Circle G Tractor Sales, Inc.
662-252-5272
Check your couplings coming off the pump, uncouple and redo, its a long shot but we have seen it happen when one comes undone. But it would not cause that pressure drop.
We can get you that engine rebuild kit, if you need it give us a call.
Ben
http://www.circlegtractorparts.com
Circle G Tractor Sales, Inc.
662-252-5272
Are you sure you are checking the right oil level, your hydraulic tank is what your seat is sitting on, the dipstick is directly behind the seat.
Ben
http://www.circlegtractorparts.com
662-252-5272
Sounds like you are going to need a pump, we have them in stock for that unit if you don't get here going http://www.circlegtractorparts.com, give us a call if we can help.
Ben
Circle G Tractor Sales, Inc.
662-252-5272
I second what Rich said. Although I will say it is fairly easy to pull that pump apart and visually inspect it. It will be obvious if the seals or pump body is damaged. More than likely it is not damaged.
Benjamin Bolden
Parts Manager
Circle G Tractor Sales, Inc.
(662)252-5272-phone
(662)252-7789-fax
You will do better to screw them into the tie-rod first. It seems like it would be difficult to try to install the ends first then screw them onto the rod.
Benjamin Bolden
Parts Manager
Circle G Tractor Sales, Inc.
(662)252-5272-phone
(662)252-7789-fax
Sounds like you may be talking about tie rod ends and the drag link. Is that correct? If so it should be easier to thread them both into the drag link then install them.
Benjamin Bolden
Parts Manager
Circle G Tractor Sales, Inc.
(662)252-5272-phone
(662)252-7789-fax
David we have the original fuel bowl assemblies in stock. I know you said you may have a clearance problem but I would be glad to measure the bowl against your measurements to see if it would fit. We would also have to measure the hole in the fuel tank to make sure it is the correct size and pitch.
Benjamin Bolden
Parts Manager
Circle G Tractor Sales, Inc.
(662)252-5272-phone
(662)252-7789-fax
