Forum Replies Created
-
Posts
-
I agree with the things Tommy suggested but it sounds like it may be your pump, you know a seal is leaking dumping that fuel into the governor. Let us know if you need anything.
Phillip
Circle G Tractor Sales, Inc.
We have all the hoses in stock http://www.circlegtractorparts.com
Phillip
Circle G Tractor Sales, Inc.
662-252-5272
Yes you will definetly need a PTO pump to run your backhoe, check ours out at http://www.circlegtractorparts.com
Phillip
Circle G Tractor Sales, Inc.
You may want to set your rod adjustment at the lift handle where your lift does not go too high and allow the piston to go outside of the liner, when it does it will tear your o-ring. Just a suggestion.
Phillip Gooch
http://www.circlegtractorparts.com
662-252-5272
We have all the parts for that shuttle including those pins if you haven't found them. You can go to the parts store and order or give us a call.
Parts
http://www.circlegtractorparts.com
662-252-5272
Eric, not sure what hp tractor that is but most of the time when your lift drifts down it is the o-ring torn on the piston in the hydraulic tank. As for the PTO spinning, most of them do free spin but you should be able to stop it with your hand if PTO is set up correctly. Give us a call at 662-252-5272 and maybe we can help you out.
Phillip Gooch
Circle G Tractor Sales, Inc.
Look and see what your engine # is on side of block and call us at 662-252-5272 or you can go to our online parts store at http://www.circlegtractorparts.com and under the search box find your engine and go to the fuel section and order them online. Either way we will have what you need.
Phillip Gooch
Circle G Tractor Sales, Inc.
David, go to our parts store http://www.circlegtractorparts.com and type in search box, tractor seat and see if that looks like yours.
Phillip Gooch
Circle G Tractor Sales, Inc.
662-252-5272
Toby, if you don't find a cross we carry all the chinese made tractor filters in stock, you can go to our online store and take a look at your filter. http://www.circlegtractorparts.com
Phillip Gooch
Circle G Tractor Sales, Inc.
662-252-5272
Mickey, we had one in the shop last week that had broken the end off the driveshaft where your balls fit on coupler, you can take the hose clamps off rubber boot and collapse the driveshaft cover to expose the ends and you will know right away if it is the couplers or driveshaft. As mentioned look out for the little 8MM balls because they will go everywhere if that is the problem. If you need any parts you can give us a call 662-252-5272 or go online and order at http://www.circlegtractorparts.com we stock every part for your tractor.
Phillip Gooch
Circle G Tractor Sales, Inc.
