Dave Anderson

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: 404G2 Can\'t get fuel into the injection pump #47821
    Dave Anderson
    Participant
      • Offline

      The attached is a pic of the pump. The blue cap on top and toward the rear is the mystery one. It behind the top of the throttle arm. I think it could be the fill port for the pump lube oil bot sure.

      Thanks, Dave

      Attachments:
      You must be logged in to view attached files.
      in reply to: 404G2 Can\'t get fuel into the injection pump #47813
      Dave Anderson
      Participant
        • Offline

        Well, the tractor is running fine this morning. It came to life quite nicely on the second round on the starter. My problem with not being able to get fuel into the injection pump was because I had loosened the wrong plug. Teach me to look at a photo with an arrow pointing to the bleed port without putting my glasses on. Silly me. What is that large plug just behind the bleed port for? This is my first encounter with a Chinese tractor and I quite like them. The documentation on the other hand not so much.

        Thanks for the help, guys. I suspect I’ll be looking for more.

        Dave

        in reply to: 404G2 Can\'t get fuel into the injection pump #47808
        Dave Anderson
        Participant
          • Offline

          The tank screen looks good from the top andĀ  The fuel filter was replaced when the fuel system was drained and refilled with winter diesel. The primer pump puts lots of fuel to the inlet of the injector pump so I don’t thinkĀ  the filter is plugged. I was turning the primer clockwise; doesn’t feel like there’s any threads in there at all.

          I’ll drain the tank tomorrow and have a better look at it. With the fuel getting to the injector pump inlet any thoughts on what’s stopping it?

        Viewing 3 posts - 1 through 3 (of 3 total)