DavidPrivett

Forum Replies Created

Viewing 10 posts - 201 through 210 (of 1,063 total)
  • Author
    Posts
  • in reply to: farmpro 2430 ty395e engine transmission #49439
    DavidPrivett
    Participant
      • Offline

      yeah being cast you are better off replacing    good luck on the reassembly

      in reply to: farmpro 2430 ty395e engine transmission #49437
      DavidPrivett
      Participant
        • Offline

        is the fork some kinda cast or is it stamped metal, I was wondering if you were gonna try  weld it back together.

        in reply to: 3 Point float and slop makes for difficult Backhoe work #49435
        DavidPrivett
        Participant
          • Offline

          cool glad it worked out for you , I miss Bob on this forum he has so much knowledge.

          in reply to: farmpro 2430 ty395e engine transmission #49432
          DavidPrivett
          Participant
            • Offline

            have you pulled the  cover off that the shifter is mounted in. I seem to remember someone having a retainer pin fall out that hold the fork in place , it acted like a broke fork.

            in reply to: Bad head gasket? #49431
            DavidPrivett
            Participant
              • Offline

              I have never heard of green fuel , I buy red fuel for the farm , yes it is tax free fuel and there is a penalty if you get caught with it in a road vehicle. Todays diesel is kinda clear with a green tint it does not look like it did 50 years ago. If you have the place where you can buy red fuel try it and see if the color in the area changes if you can not get the  leak to seal.

              in reply to: Bad head gasket? #49426
              DavidPrivett
              Participant
                • Offline

                could you have a bad freeze plug? clean the engine off as best as you can then fire it up and see if you can pin point where it is coming from. I guess there is a chance you have a pinhole in a radiator hose and it is spraying on the block too.

                in reply to: 3 Point float and slop makes for difficult Backhoe work #49424
                DavidPrivett
                Participant
                  • Offline

                  bob rooks I think pretty much left this forum you might want to search his name for this ,glad you are not dead.

                  in reply to: 3 Point Hitch #49421
                  DavidPrivett
                  Participant
                    • Offline

                    as I reread your post if the lift works when the tractor is off I do not have a clue as the engine must be running to rotate the pump unless you would have a electric hydro pump somewhere , I really doubt. now the arms could go down with no power but not up.

                    in reply to: 3 Point Hitch #49419
                    DavidPrivett
                    Participant
                      • Offline

                      If it is like mine the pressure relief is in the housing that the 3 point control lever is mounted on. and start at the pump to trace your lines high side is the smaller one, return-suction is larger and it should have a filter or a screen housing in line possibly  under  the floor board.

                      in reply to: 3 Point Hitch #49416
                      DavidPrivett
                      Participant
                        • Offline

                        look like they are up to me too.  There have been times when the height adjuster was not set properly and the piston in the lift got extended beyond where it should sit at max. lift  and gets jammed , if they do not go down this might be the reason why.

                      Viewing 10 posts - 201 through 210 (of 1,063 total)