Dennisd

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: YC-13 Excavator Starting Issues #35796
    Dennisd
    Participant
      • Offline

      Okay, was able to get generator and regulator from Guys at Keno,

      which gets us to the starter. It seems this was the issue from the get go. Keno says that they have no idea what this starter is. Here is what I got off the tag.

      Here is the number that I got off of that starter.  QD1388A

      Only other info on the tag was : 12V      200    1.8kw

       

      I am pretty certain that it has a Laidong engine.

      We have taken the starter apart and cleaned it out, but still nothing.

      Any ideas?

      in reply to: YC-13 Excavator Starting Issues #35643
      Dennisd
      Participant
        • Offline

        It was hooked up backwards after I had taken it to be tested. I'm sure

        you are right about the alternator. I was wondering if there was a way to bypass the alternator and still start the engine? I'd like to move it into the garage. Also, I appreciate you guys responding.

        in reply to: YC-13 Excavator Starting Issues #35641
        Dennisd
        Participant
          • Offline

          Next question would be a parts supplier. Where?

          in reply to: Nortrac NE1500 Trackhoe Excavator #34233
          Dennisd
          Participant
            • Offline

            Bob, you have hit it right on the nose. I was hoping I could find some sort of user manual for the controls and instruments. I have the manuals

            on the engine. The control lever boots are all shot so I was hoping I could replace some of that stuff. I have figured out most of the operations, just thought it would be nice to find a manual. Also was looking for a source for parts.

          Viewing 4 posts - 1 through 4 (of 4 total)