Forum Replies Created
-
AuthorPosts
-
I am going to consolidate my 3 problems here. Had a good work day with the tractor the other day. 4 wheel held up. Gauges held up. Was able to load firewood logs on bucket and top of box blade and they remained in the up position. I still think my current on going problem is hydraulic and located in a more central location affecting multiple functions. Bucket cannot lift front wheels like before, bucket and 3 point ( with box blade) sink over time. Problem noticed when working is also including steering. Wheel seems “loose” and often seems to hit a wall when turning and takes some effort to overcome it and continue the turn. Fluid level fine, filter fairly new. Thoughts please.
So go out to clean up my tools etc… flip the switch and voila everything is fine. A gremlin lurks about and yes most likely a ground.
Did the bypass forgot to mention any idea where the common ground might be.
Finally got around to 4 wheel job. My mod to help keep ball bearings in place was to add a 1 inch collar behind the circlip. Seems the circlip is the weak link when I open things up to repair. Not sure how it will hold up but had to try something.
Attachments:
You must be logged in to view attached files.jinma 254 with koyker 140
used to be able to lift front wheels way off the ground, maybe 12 inches, now only an inch or twoSo wimped out and paid someone to change out the pump. All good for now. Wish I could have been there to watch. Did not seem to be to hard. Now on to 4 wheel drive.
So after trying everything I could pump still leaked. Got a new pump from Circle G and am going to attempt to install. Hoping for advice/suggestions before I start as this is new territory for me.
Thankswill not be able to do any work till next week
looks to be km385 most tags and labels are in bad shape. km385 was what i was told at purchase
That was Macks suggestion at affordable, carefully take it apart. If I fubar it then time for the whole pump
thanks -
AuthorPosts