Robert Mollenhauer

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: ZL-20 FEL lost Hydraulic Pressure #50039
    Robert Mollenhauer
    Participant
      • Offline

      Jinma 304, Bought new in 2002 made a few years prior to that.

      in reply to: ZL-20 FEL lost Hydraulic Pressure #50038
      Robert Mollenhauer
      Participant
        • Offline

        Went through and tightened all fittings. None seemed loose but tightened all the same. Could not find anything wrong. Next day all was working again. Gremlins???

        in reply to: TY395I Engine needed #49933
        Robert Mollenhauer
        Participant
          • Offline

          Cannot import from China as they do not meet EPA emission standards.

          in reply to: TY395I Engine needed #49932
          Robert Mollenhauer
          Participant
            • Offline

            I just bought a TY395I engine from Circle G Tractor parts. It was $3950 delivered to Arizona. I have bought numerous parts for my tractor from them and they always treated me right.

             

            in reply to: ZL20 FEL Manual #49269
            Robert Mollenhauer
            Participant
              • Offline

              Thank you  a lot.  This is great, I can read it.

               

              Have you experienced the problem they have with different cylinders?  I have a pile of useless parts due to this.

              I have  Jinme 304 and the parts I have ordered from their manual don’t fit half the time.  Seems like some parts that do fit are from the 200 series.  I bought the tractor as a crate job in 2002.  It has been a good purchase except for the availability of correct parts.

              Thanks again for ypour help with this.

              Fred

               

              in reply to: ZL20 FEL Manual #49266
              Robert Mollenhauer
              Participant
                • Offline

                That would be great. I cannot read mine it is so poor quality.

                Could you attach the pdf here?

                 

                Thanks

                in reply to: Rusty Fuel Tank #48608
                Robert Mollenhauer
                Participant
                  • Offline

                  Thanks for the information.  I am guilty on both counts, don’t keep the tank full and the tractor is not housed inside.

                  I left the sediment bowl on and the inline filters do have a base for condensation collection.  As I said this was just a quick fix so I could work on clearing the snow storms we just had.  Two feet on the level with drifts four to five feet.

                   

                  I think it is a major undertaking to remove the tanks so I think I will wait until it gets a little warmer.  I think I can keep the fuel clean and dry for the limited use until then.

                   

                  Thanks again. :yahoo:  :yahoo:

                Viewing 7 posts - 1 through 7 (of 7 total)